Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man33) Peripheral online
MX-7000N MX-LCX3 3 – 4
6)
Remove the two fixing screws of the machine entry port, and
remove the entry port cover.
remove the entry port cover.
7)
Attach the entry port cover reversely to the machine and fix it
with the two fixing screws which was removed in procedure 3.
* When working, be careful to prevent damage of the paper
with the two fixing screws which was removed in procedure 3.
* When working, be careful to prevent damage of the paper
pass (transport) surface on the entry port cover.
8)
Release the lock, and open the right door.
9)
Install the upper cover, and fix with screws.
10) Close the right door.
C. Installation to the main unit and height
adjustment
1)
Use the edge of the connection plates F/R mounted to the
lower side of the machine and the mark on the mounting plate
in the lower left side of the LCC to check the installation height.
Front side
lower side of the machine and the mark on the mounting plate
in the lower left side of the LCC to check the installation height.
Front side
Rear side
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man33) service manuals if exist.