Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man25) Peripheral online
6
Accessing the Fiery X3eTY2
Accessing the Fiery X3eTY2
To service the Fiery X3eTY2, you must perform the following tasks:
• Shut down the Fiery X3eTY2; power off both the Fiery X3eTY2 and the MFP.
• Remove the Fiery X3eTY2 from the MFP.
• Open the Fiery X3eTY2.
T
O
SHUT
DOWN
THE
F
IERY
X3
E
TY2
CAUTION:
Before you touch any parts inside the Fiery X3eTY2, make sure to wear an
ESD grounding wrist strap and follow all ESD safety precautions.
1.
Complete the steps listed below for your MFP model:
F
IGURE
C
Fiery Settings screen
MX-7000/6200/5500
MX-4500/3500
• Press the Copy tab on the MFP touch
panel.
• Press the Fiery icon at the bottom of
the touch panel.
• Press Fiery Settings.
The Fiery Settings screen appears.
• Press the System Settings button on
the MFP.
• On the touch panel, press Admin
Password and then press Password.
• On the touch panel, use the keyboard
to enter the administrator password for
the MFP. Press OK and then press OK
again at the next screen.
the MFP. Press OK and then press OK
again at the next screen.
This password is not the same as the
administrator password for the
Fiery X3eTY2.
administrator password for the
Fiery X3eTY2.
• At the System Settings screen, use the
arrows to scroll to Printer Settings and
press Printer Settings.
press Printer Settings.
• Press Fiery Settings.
The Fiery Settings screen appears.
Server Name
Idle
Idle
##### MB x.x
Info
Line selection
buttons
buttons
Up button
Down button
Menu button
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man25) service manuals if exist.