MX-5500N, MX-6200N, MX-7000N (serv.man25). MX- PEX2 SERVICE MANUAL - Sharp Copying Equipment Peripheral (repair manual). Page 5

 

The Fiery Print Controller MX-PEX1/MX-PEX2 adds computer connectivity and 
highly efficient PostScript and PCL printing capacity into Sharp MX-7000/6200/5500/
4500/3500 series copiers and printers. This service guide describes how to remove or 
replace Fiery Print Controller MX-PEX1/MX-PEX2 components and how to reinstall 
system software. 

 

The term “Fiery X3eTY2” is used in this manual to refer to the Fiery Print 

Controller MX-PEX1/MX-PEX2. The term “MFP” (multifunctional peripheral) is used 
to refer to any Sharp MX-7000/6200/5500/4500/3500 series copier or printer.

Generally, the Fiery X3eTY2 does not require regular maintenance. The Fiery X3eTY2 is 
shipped with all necessary software installed. Use the procedures in this guide to inspect, 
remove, reseat, or replace major hardware components and to reinstall system software. 
Replacement parts for the Fiery X3eTY2 are available from your authorized service 
support center. You must reinstall system software if you replace the hard disk drive 
(HDD) or update the system software. You can also reinstall system software as a way to 
troubleshoot the system.

 

Printing system