Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man25) Peripheral online
85
Error codes and conditions
Printing (continued)
A print job stalls or stops
after one or a few pages.
after one or a few pages.
PostScript or application error
1. Cancel the Fiery X3eTY2 print job.
2. If this fails to clear the problem, power off/on the MFP.
Missing, incorrect, or faulty DIMMs
or faulty DIMM connections
or faulty DIMM connections
1. Power off the Fiery X3eTY2; check for missing DIMMs and
reseat the DIMMs to remove any oxidation on the
connectors.
connectors.
2. Verify memory amount on the Configuration Page.
3. If you have two DIMMs installed, determine if a DIMM is at
fault:
Remove the DIMM currently installed in socket
DIMM1, and reboot the system. Reboot again with the
other DIMM installed in DIMM2. If the problem is
solved by one of the DIMMs, replace the other DIMM.
DIMM1, and reboot the system. Reboot again with the
other DIMM installed in DIMM2. If the problem is
solved by one of the DIMMs, replace the other DIMM.
If the problem persists for both DIMMs, proceed to the
next step.
next step.
4. Clear the CMOS and power-up settings (see page 89).
5. Replace the motherboard.
T
ABLE
B
Fiery X3eTY2 error codes and conditions (Continued)
Symptom
Possible cause
Suggested action
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man25) service manuals if exist.