MX-5050N, MX-5050V, MX-5070N, MX-5070V, MX-6050N, MX-6050V, MX-6070N, MX-6070V (serv.man33). CCE 1738 SERVICE PARTS SETUP OF CORRECTIVE PARTS FOR PRINT CONTAMINATION FROM FUSER ROLLER - Sharp Copying Equipment Technical Bulletin (repair manual). Page 6

Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man33) Technical Bulletin online

[CR4]  Procedure to install CL roller unit to Fusing unit
CL roller unit which will be 
installed
4 screw
Fix with M4 screw.
Fit the  convex section of CL roller unit
to the frame hole of Lower PG.
Fit the notch section (dent) of CL roller unit 
to the frame caulking section (convex) of Rear lower PG.
Fix with M4 screw.
4 screw
M3 Step 
Rear side
Front side
Fix the cover with M3 
Step screw.
Cover (resin)
Install Rear lower PG unit with CL roller 
unit to Fusing unit with M4 screws (x2).  
This is the end of the installation work.
*Conduct the wiring of harness.
Step3
Step4
Page of 6
Display

Download Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man33) Technical Bulletin