Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man124) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
Date:
21
st
July 2016
Model:
See below
Ref.:
CCE 1605
Colour:
White
Page:
1 of 12
TECHNICAL BULLETIN
Note for the firmware update:
Before updating the firmware, be sure to turn OFF the main power switch, and then turn it
ON.
If the firmware update procedure is executed while MFP is still operating, the panel
becomes black after the firmware update and MFP may not be able to start up in some
rare cases.
Before updating the firmware, be sure to turn OFF the main power switch, and then turn it
ON.
If the firmware update procedure is executed while MFP is still operating, the panel
becomes black after the firmware update and MFP may not be able to start up in some
rare cases.
Once the version is updated from 0201K100_16011400 or earlier version, it cannot be
restored to the original version.
restored to the original version.
If Google Drive is used on the version 04.00.K1.00/04.00.Z1.00 or earlier versions, the
phenomenon that Google drive becomes unavailable occur.
In this case, please change the setting of “Google Drive” of Cloud Connect Settings in
System Settings to Enable.
phenomenon that Google drive becomes unavailable occur.
In this case, please change the setting of “Google Drive” of Cloud Connect Settings in
System Settings to Enable.
1. Model Name:
MX-3050N/3550N/4050N/5050N/6050N
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N
MX-LC17/FN27/FX15
2. Description:
Upgrade of ICU,ASIC,PCU,SCU,SPF-ROM,E-Manual
From July 2016 production
Model
ROM
control No.
BUNDLE
ICU
ASIC
PCU
SCU
SPF
E-Manual
MX-3050N
MX-3550N
MX-4050N
MX-5050N
MX-6050N
MX-3550N
MX-4050N
MX-5050N
MX-6050N
D00
0400K100_
16061400
0400K100 0400Z100 0400Z100 0300Z100
-
0220K100
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5070N
MX-6070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5070N
MX-6070N
0400Z100_
16061400
0400Z100 0400Z100 0400Z100 0300Z100 0300Z100 0220Z100
*Last 8-digit of BUNDLE version is displayed when updating the firmware in the field. Factory default is
fixed to 00000000.
*When updating MX-3060N/3560N/4060N/3070N/3570N/4070 to this firmware, please also update OCR
dictionary data at the same time.
fixed to 00000000.
*When updating MX-3060N/3560N/4060N/3070N/3570N/4070 to this firmware, please also update OCR
dictionary data at the same time.
ROM UPGRADE..... (3).
Sharp Electronics (UK) Ltd., Document Systems Support
Item of change: See the separate sheet.
Upgrade of FAX expansion kit, Paper feed tray, Finisher
From mid-June 2016 production
Target model
ROM
control No.
Firmware version
MX-FX15
B00
02.00.Z1.00
From July 2016 production
MX-LC17
MX-LC17
01.01.Z1.00
Note: Only for 45units of July production, ROM control No. is [A10●].
From September 2016 production
MX-FN27
MX-FN27
01.02.Z1.00
Item of change::See the separate sheet
MX-3060N/3560N/4060N/3070N/3570N: ROM Version Combination History Table
No.
ROM
Control
No.
BUNDLE
ICU
ASIC
PCU
SCU
SPF
E-Manual
Action
T/R No
(2)
B01
0201Z100_
16011400
0201Z100 0201Z100 0200Z100 0200Z100 0100Z10a 0150Z100
2016/2
Mid
CCE-1515
(1)
B00
0200Z100_
15121800
0101Z100 0200Z100 0200Z100 0200Z100 0100Z10a 0150Z100
2015/12
Mid
CCE-1507
MX-3050N/3550N/4050N: ROM Version Combination History Table
No. Destination
ROM
Control
No.
BUNDLE
ICU
ASIC
PCU
SCU
FAX
E-Manual
Action
T/R No
(2)
North
America
B01
0201K100_
16011400
0201K100 0201Z100 0200Z100 0200Z100 0100Z100 0130K100
2016/2
Mid
CCE-1515
Except for
North
America
A01
(1)
ALL
B00
0200Z100_
15121800
0200K100 0200Z100 0200Z100 0200Z100 0100Z100 0130K100
2015/12
Mid
CCE-1507
ROM Version Combination History Table of the finisher
No.
Target model ROM Control No. Firmware version
Action
T/R No
(1)
MX-FN28
MX-FN30
MX-FN31
A01
01.01.Z1.00
2016/5
Mid
CCE-1584
Sharp Electronics (UK) Ltd., Document Systems Support
MX-FN27
MX-FN29
A11
【Description】
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
1
Main unit
control
Correction of failure to retrieve information on auto registered user via E-RIC
○
○
○
○
2
Main unit
control
Correction of failure to respond properly after double tapping Home key
○
○
○
○
3
Main unit
control
Correction of the problem that E7-93 trouble occurs while restoring the data
in Document Filing from past models
○
○
○
○
4
Main unit
control
Correction of E7-20 trouble occasionally caused by the misdetection
○
○
○
○
5
Main unit
control
Modification has been made to eliminate "Display only in MFP" from the
options of "View Password Entry Screen" in Remote operation so that it is
now selectable from 2options; "Display in Both PC and MFP" and "Display
only in PC".
○
○
Done
Done
6
Main unit
control
Modification has been made to be unable to change the settings of Paper
Type, Paper Size, Feeding Approved Job, Weight of Plain Paper for Paper
Tray from Web Page.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
○
○
Done
Done
7
Main unit
control
Modification has been made to be able to edit the address book from Web
Page while operating the main unit, and the message displayed on the main
unit during editing the Address Book has been changed.
○
○
Done
Done
8
Main unit
control
Correction of “PPD2-PRI” jam
Restoring the data in Document Filing from past model and then reprint the
data causes “PPD2-PRI” jam.
○
○
Done
Done
9
Main unit
control
Correction of “E7-03” which may occur depending on the timing when
starting up the machine
○
○
Done
Done
10
Main unit
control
Correction of failure for touch panel to respond after recovering from power
save mode in low temperature environment
○
○
Done
Done
11
Main unit
control
Correction of H3-02 error and enhancement to prevent misdetection of H4
error
○
○
Done
Done
12
Main unit
control
Preventive measure against Cartridge eject error (F2-95 to 98)
This measure will be necessary because there are units with an eject arm
with less force to eject the cartridge.
○
○
Done
Done
13
Main unit
control
Correction of L4-03 error
When a cover is opened after MFP entering Eco scan mode during
warm-up, the L4-03 error occurs due to misdetection.
○
○
Done
Done
14
Main unit
control
Correction of the misalignment from the center when changing the ratio
with“Side1/2, XY Ratio Settings”in Paper Settings of Web Page
○
○
Done
Done
15
Main unit
control
Correction of the problem that Hidden Pattern Print cannot be performed
when pressing “Print Now” in Document Filling
○
○
Done
Done
16
Main unit
control
Correction of the problem that the error is displayed by specifying the top
tray as the exit tray of FAX when MX-FN31 (Saddle Finisher) is installed.
○
○
Done
Done
17
Main unit
control
Correction of the following problem:
When Auto Power Shut-Off is enabled and also the motion sensor mode is
○
○
Done
Done
○=applied
Sharp Electronics (UK) Ltd., Document Systems Support
enabled, the machine occasionally cannot wake up from Energy Save
mode.
18
Main unit
control
Correction of the following problem:
When MX-FN31 (Saddle Finisher) is installed if the pamphlet print is
performed with Split ON, it is split by 15 pages although it should be split by
20 pages.
○
○
Done
Done
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-5070N
MX-6070N
19 Main unit control
Correction of the following problem:
When pressing the power key of the panel while MFP is waking up from
Energy Save mode by the motion sensor (For approx. 1.5-sec), the
detection processing of the power key of the panel will be disabled, and then
the power key of the panel will stop responding.
○
○
Done
Done
20 Main unit control Correction of U2-91 which may be caused after the power OFF/ON
○
○
Done
Done
21 Main unit control
Modification to eliminate the noise from the relay working on the
dehumidification heater or the noise from the fan driving which are
generated when receiving the network packet of Web Page reference etc. in
Energy Save mode.
○
○
Done
Done
22 Main unit control Correction of C4-20 trouble occasionally caused by the misdetection
NA
NA
○
○
23 Main unit control
Correction of the following problem:
The status indicator lamp does not light red when the toner cover of 50/60
PPM machines is opened.
NA
NA
○
○
24
Image quality
Correction of problem with coloring image
This problem occurs while printing with Overlays setting or printing the
image of overlapped graphics.
○
○
○
○
25
Image quality
Correction of background appeared on void area of scanned image with
Compression Ratio being set to "High”
○
○
○
○
26
Image quality
Correction of contamination on white paper which occurs while performing a
job with odd number of original / duplex print setting etc.
○
○
Done
Done
27
Image quality
For the improvement of the accuracy of the laser power correction, the
modification has been made not to apply the correction value manually
adjusted by the user or the service personnel to the data which is output with
SIM61-11(Laser power auto correction) and SIM61-12(Laser power manual
correction).
○
○
Done
Done
28
Image quality
Correction of the image runout which may be caused on the backside when
performing DSPF duplex scan
NA
○
Done
Done
29
Image quality
Addition of the button to execute the main charger cleaning mode to System
Settings to enable the administrator to perform the cleaning of the main
charger when the black line or color line (streak mottle) appears on the
printed paper
NA
NA
○
○
30
Image quality
Improvement of the problem that the uneven charge may be caused on
50/60 PPM models in low humidity environment.
NA
NA
○
○
31
Printer
On DirectOffice, the following modifications have been made:
*Support of Arabic, Hebrew, and Thai languages
*Correction of the problem that the frame border is printed when performing
Direct Print
○
○
○
○
32
Printer
Correction of data becomes unprintable while continue printing using Print
Release
○
○
○
○
33
Printer
Modification has been made to store the printer job received in Remote PC
○
○
Done
Done
○=applied