MX-4100N, MX-4101N, MX-5000N, MX-5001N (serv.man38). Installation Manual-(Complete Manual) - Sharp Copying Equipment Service Manual (repair manual). Page 116

MX-4100N  Dehumidifying heater  24 – 7

2)

Attach the heater heat sink to the desk heater mounting plate
(packing part No. 23), and secure it with the screw (M3x4 S-
tight) (packing part No.22).
Attach the edge wire saddle (packing part No. 24) and pass the
desk harness through it.

1)

Remove the tray 3 and the tray 4.

2)

Remove the screw, and remove the desk rear cabinet and the
rear cover of the main unit.

1)

Attach the desk heater unit to the desk frame, and secure it
with the screw (M3x8 S-tight) (package part No. 25).
Pass the harness of the desk heater through the hole on the
desk frame.

2)

Attach the caution label (package part No. 26) to the desk
frame.

NOTE: Wipe the surface where the label is to be affixed with alco-

hol, then attach the label along the mark.

3)

Secure the earth wire of the desk heater harness (package
part No. 27)  and the washer (package part No. 28) to the desk
frame with the screw (M4x8 K) (package part No. 29).

NOTE: When installing, put the direction of the earth wire terminal

within the reference range.

Reference mark

Reference

mark

Reference