Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man38) Service Manual online
MX-4100N Dehumidifying heater 24 – 8
4)
Attach the snap band of the desk heater harness to the desk
frame, and connect the desk heater harness to the harness of
the desk heater.
frame, and connect the desk heater harness to the harness of
the desk heater.
(4) Installation of the tray, the desk rear cabinet and
the rear cover of the main unit
1)
Install the desk rear cabinet to the desk heater tray that pulled
out, and secure it with the screw.
out, and secure it with the screw.
NOTE: Put out the desk heater harness from the notch part of the
desk rear cabinet.
2)
Connect the desk heater harness to the main unit.
3)
Split the main unit rear cover along the perforated line, then
attach it to the main unit, and secure it with the screw.
attach it to the main unit, and secure it with the screw.
G. Operation check after installation
1)
Turn on the dehumidifier heater switch.
2)
Measure the resistance value between the earth terminal and
the AC terminal (L side), and between the earth terminal and
AC terminal (N side) with the circuit tester, and confirm they
are not short-circuited.
the AC terminal (L side), and between the earth terminal and
AC terminal (N side) with the circuit tester, and confirm they
are not short-circuited.
3)
When not using the heater after checking, turn off the dehu-
midifier heater switch.
midifier heater switch.
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man38) service manuals if exist.