MX-3500N, MX-3501N, MX-4500N, MX-4501N (serv.man140). 036-SETTING OF SCANNER DRY HEATER AS SERVICE PART. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man140) Technical Bulletin online

Sharp Electronics (UK) Ltd., Technical Services Group
CCE-299R
9. Secure the heater wire with a snap band.
*Secure the heater wire with the snap band while pulling it in the direction of the arrow. (The lower part of the wire
must be free from loose.)
*Cut the snap band tip approx. 5 mm or less.
10. Move the lamp unit by hand and check that all the movable parts move smoothly.
*Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror unit.
*Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
Page of 5
Display

Download Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man140) Technical Bulletin