Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man12) Service Manual online
MX3501N DISASSEMBLY AND ASSEMBLY 5 – 4
5)
Remove the screw, and remove the paper feed unit.
(1) Pickup roller
(2) Paper feed roller
(3) Separation roller
(2) Paper feed roller
(3) Separation roller
1)
Remove the paper feed cover. (Refer to "1. Exterior section -
A. DSPF unit - (3) Paper feed cover.")
A. DSPF unit - (3) Paper feed cover.")
2)
Remove the pawl, and remove the paper feed PG upper cover.
3)
Remove the pawl. Remove the pickup roller holder. Remove
the pickup roller from the pickup roller holder.
the pickup roller from the pickup roller holder.
4)
Remove the paper feed roller.
5)
Remove the screw, and remove the paper feed PG lower
cover.
cover.
6)
Disengage the pawl, and remove the reverse pressure release
lever. Remove the separation roller.
lever. Remove the separation roller.
(4) DSPF paper feed tray upper limit sensor
(5) DSPF document upper limit sensor
(6) DSPF upper door open/close sensor
(7) DSPF paper pass sensor 1
(8) DSPF document random sensor
(5) DSPF document upper limit sensor
(6) DSPF upper door open/close sensor
(7) DSPF paper pass sensor 1
(8) DSPF document random sensor
1)
Remove the front cabinet. (Refer to "1. Exterior section - A.
DSPF unit - (1) Front cabinet.")
DSPF unit - (1) Front cabinet.")
2)
Remove the rear cabinet. (Refer to "1. Exterior section - A.
DSPF unit - (2) Rear cabinet.")
DSPF unit - (2) Rear cabinet.")
3)
Remove the paper feed cover. (Refer to "1. Exterior section -
A. DSPF unit - (3) Paper feed cover.")
A. DSPF unit - (3) Paper feed cover.")
4)
Remove the paper feed unit. (Refer to "2. Paper feed section -
B. Paper feed unit.")
B. Paper feed unit.")
5)
Disconnect the connector. Remove the screw, and remove the
paper feed PG upper supporting plate.
paper feed PG upper supporting plate.
1
2
1
2
1
2
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man12) service manuals if exist.