Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man12) Service Manual online
MX3501N DISASSEMBLY AND ASSEMBLY 5 – 7
D. No.1 resist roller (Drive)
1)
Remove the front cabinet. (Refer to "1. Exterior section - A.
DSPF unit - (1) Front cabinet.")
DSPF unit - (1) Front cabinet.")
2)
Remove the rear cabinet. (Refer to "1. Exterior section - A.
DSPF unit - (2) Rear cabinet.")
DSPF unit - (2) Rear cabinet.")
3)
Remove the paper feed unit. (Refer to "2. Paper feed section -
B. Paper feed unit.")
B. Paper feed unit.")
4)
Remove the DSPF No.1 resist roller brake clutch and remove
the DSPF No.1 resist roller clutch. (Refer to "3. Upper trans-
port section - A. DSPF No.1 resist roller brake clutch, B. DSPF
No.1 resist roller clutch.")
the DSPF No.1 resist roller clutch. (Refer to "3. Upper trans-
port section - A. DSPF No.1 resist roller brake clutch, B. DSPF
No.1 resist roller clutch.")
5)
Remove the resin E-ring, and remove the No.1 resist roller
(idle).
(idle).
6)
Remove the screw, lift the paper feed rotation tray, and remove
the paper feed PG lower.
the paper feed PG lower.
7)
Remove the resin E-ring and the bearing, and remove the
No.1 resist roller (drive).
No.1 resist roller (drive).
8)
Remove the E-ring and the bearing from the No.1 resist roller
(drive).
(drive).
E. DSPF paper pass sensor 2
F. Transport roller 1 (drive)
1)
Remove the front cabinet. (Refer to "1. Exterior section - A.
DSPF unit - (1) Front cabinet.")
DSPF unit - (1) Front cabinet.")
2)
Remove the rear cabinet. (Refer to "1. Exterior section - A.
DSPF unit - (2) Rear cabinet.")
DSPF unit - (2) Rear cabinet.")
3)
Remove the screw, and remove the transport PG upper.
4)
Disconnect the connector, and remove the DSPF paper pass
sensor 2.
sensor 2.
1
2
1
2
1
2
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man12) service manuals if exist.