Read Sharp MX-2630 Service Manual online
MX-2630N 2 – 6
4)
Move the PTC cleaning rod back and forth a few times to clean
the PTC wire.
the PTC wire.
After completion of cleaning, insert the cleaning rod completely to
the bottom.
the bottom.
5)
Attach the waste toner box.
Both ends being locked surely.
6)
Close the front cover.
For the destination EXIT TRAY CABINET option.
Finisher or exit tray cabinet have to be installed before turning on
the machine otherwise get L4-11 code will occur.
the machine otherwise get L4-11 code will occur.
C. Paper feed tray setup
(1)
System setting
1)
Press the [SETTINGS] key.
2)
Touch the [Init. Install Settings] key.
3)
Touch the [Password] key at the Administrator Login.
Enter the password with 10-key. "admin"
4)
Touch the [Paper Tray Settings] key to configure the settings.
These settings specify the paper type, paper size, and functions
allowed for each paper tray. When the [Tray Settings] key is
touched, a list appears showing the trays and the current settings.
These settings specify the paper type, paper size, and functions
allowed for each paper tray. When the [Tray Settings] key is
touched, a list appears showing the trays and the current settings.
5)
Touch the [Each tray] key in the above screen to change the set-
tings. The following settings can be configured.
tings. The following settings can be configured.
(2)
Tray size setup
1)
Pull out the paper tray.
Gently pull the tray out until it stops.
If paper remains in the tray, remove it.
2)
Adjust the guide plates A and B by squeezing their lock levers and
sliding them to match the vertical and horizontal dimensions of the
paper to be loaded.
sliding them to match the vertical and horizontal dimensions of the
paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
while squeezing its lock lever.
Item
Description
Type
Select the type of paper that is loaded in the tray. The
paper types that can be selected vary by paper tray.
paper types that can be selected vary by paper tray.
Size
Select the paper size from the list. The paper sizes
that can be selected vary by tray. The sizes that can
be selected may also be restricted by the paper type
selected above.
If the desired size does not appear in the list, select
[Custom Size] and directly enter the size (only for the
bypass tray).
that can be selected vary by tray. The sizes that can
be selected may also be restricted by the paper type
selected above.
If the desired size does not appear in the list, select
[Custom Size] and directly enter the size (only for the
bypass tray).
Feeding Approved
Job
Job
Select the modes that can be used. If there is a
function that you do not wish to be used with the
selected tray, disable the function. When the "Type" is
other than plain paper, recycled paper, colored paper,
or a user type, [Fax] and [Internet Fax] cannot be
selected.
function that you do not wish to be used with the
selected tray, disable the function. When the "Type" is
other than plain paper, recycled paper, colored paper,
or a user type, [Fax] and [Internet Fax] cannot be
selected.
A
B
Click on the first or last page to see other MX-2630 service manuals if exist.