MX-2630. Install Manual - Sharp Copying Equipment Service Manual (repair manual). Page 11

MX-2630N  2 – 3

4-b)

Raise a lever to the left. Pull out the developing unit to 
remove.

4-c)

Remove the fixing tape.

Ĭ

ĭ

4-d)

Insert the developing unit so as not to give a strong shock to 
the main unit gently.Raise a lever to the right.

Slide the developing unit horizontally into the machine, in the 
direction of the arrow, until developing unit locks into. place.
Do not push the unit diagonally, as contact with the drum may 
occur causing damage.

When removing or installing the developing unit, put your 
hand from below the unit and slide it in parallel along the 
guide.
At that time, be careful not to touch the roller surface.

When installing the machine, there is no need to remove or 
install the OPC drum unit. If it must be removed or installed 
for any reason, follow the procedures below. When removing 
or installing the OPC drum unit, put your hand from below the 
unit and slide it in parallel along the guide on the right side.
At that time, be careful not to touch the OPC drum surface.

4-e)

Close the drum positioning cover, and lock it. 

ĭ

Ĭ

ĭ

ĭ

Ĭ