Read Sharp MX-2630 Service Manual online
MX-2630N MX-PN16B/C/D (PUNCH MODULE) 15 – 4
2)
Connect the connector on punch waste full sensor unit to the
punch unit.
punch unit.
F. Wiring and connecting a cable
(Packed item No. 3)
1)
Wire the cable as shown in the photo below.
G. Attachment of Punch cushion A (Packed item
No. 8)
1)
Attach the Punch cushion A to the inner cover along the reference
face.
face.
H. Installation of punch waste tray
(Packed item No. 4)
1)
Install the punch waste tray as shown in the photo below.
I.
Attachment of top cover and rear cabinet
1)
Attach the top cover by moving toward the direction of an arrow 1.
Then slide the top cover in the direction of an arrow 2.
Then slide the top cover in the direction of an arrow 2.
6HQVRUKROGHU
3XQFKZDVWHIXOOVHQVRUXQLW
+DUQHVVJXLGH
&DEOH
Reference face:
Touch inner cover with left side surface of Punch cushion A.
Touch Punch inner cover with back side of Punch cushion A.
Inner cover
Punch inner cover
Attach the cushion A.
Attach the cushion A.
3XQFKZDVWHWUD\
Click on the first or last page to see other MX-2630 service manuals if exist.