Read Sharp MX-2630 Service Manual online
MX-2630N MX-PN16B/C/D (PUNCH MODULE) 15 – 2
5)
Open front cabinet of the finisher.
6)
Remove 4 screws to remove a fulcrum for top cover.
7)
Incline a lever to the right and open top cover.
8)
Slide the top cover toward the direction of an arrow 1 and remove
the top cover toward the direction of an arrow 2.
the top cover toward the direction of an arrow 2.
B. Removal of dummy unit
1)
Disconnect the connector on rear side.
2)
Remove a screw, slide toward front and uplift the guide. The hook
will be removed; remove the guide from rear side.
will be removed; remove the guide from rear side.
3)
Cut 5 sections of insertion slot for punch waste tray using a nipper
and remove.
and remove.
C. Attachment of positioning guide (Packed item
No. 5)
1)
Attach right edge of positioning guide in reference to the center of
the scale. Use a screw (M3x6) removed in the step 3) in “Unpack-
ing”.
the scale. Use a screw (M3x6) removed in the step 3) in “Unpack-
ing”.
Top cover
Fulcrum
Screws
ĭ
Į
Ĭ
Click on the first or last page to see other MX-2630 service manuals if exist.