Read Sharp MX-2630 Service Manual online
MX-2630N MX-PN16B/C/D (PUNCH MODULE) 15 – 3
D. Installation of punch unit (Packed item No. 1)
1)
Attach Punch cushion B (Packed item No. 9) along the
reference face on Punch inner cover for Punch unit.
reference face on Punch inner cover for Punch unit.
2)
Install the punch unit from rear side of the finisher by letting it
through under the top cover.
through under the top cover.
3)
Make sure there is no space between base of the punch unit and
a frame.
a frame.
4)
Fix the punch unit with a screw. Use a screw (M3x6) removed in
the step 3) in “Unpacking”.
the step 3) in “Unpacking”.
5)
Attach the fulcrum for top cover again using 4 screws.
E. Attachment of punch waste full sensor unit
(Packed item No. 2)
1)
Remove filament tapes from the packing materials.
6FDOH
Reference face
Reference face
Punch inner cover
Top cover
Fulcrum
Screws
Click on the first or last page to see other MX-2630 service manuals if exist.