MX-2630. Install Manual - Sharp Copying Equipment Service Manual (repair manual). Page 6

MX-2630N  Transit, Installation (using) environment, Note  – iii

When handling the OPC drum, developing and transfer units, observe
the following items.

• To prevent  damage to the OPC drum, avoid working on the drum

unit in high intensity light areas.

• When the OPC drum is removed from the machine, cover it with

light blocking material. (When using paper, use about 10 sheets of
paper to cover it.)

• Be careful not to attach fingerprints, oil, grease, or other foreign

material on the OPC drum surface.

• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the transfer roller, primary transfer belt and secondary
transfer roller.

• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the developing unit.

• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the fusing roller and the external heating belt.

• Do not leave the fusing roller in contact state for a long time.

If these items are neglected, a trouble may be generated in the copy
and print image quality.

It is recommendable to use a forklift for bringing in the machine for
safety.

If no forklift is available, man-power of two persons is required. The
machine is considerably heavy, and requires safety precautions for
delivery and installation.

Transit of the machine must be made in packed condition to the install-
ing place.

Since the hard disk drive is built in the machine, use care not to exert
vibrations or shocks to the machine when in transit.

Remove the packing materials prior to installation in the office environ-
ment.

1

Implements, facility, 
and man power

Use a forklift. (If no forklift is available, 
manpower of two persons is required.) 

2

Delivery

Transit must be made in packed condition.