Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man51) Technical Bulletin online
CCE 620R
Mounting the Scanner Heater
1. Place the heater fixing plate as shown in the figure below, set the scanner dry heater, and then secure
1. Place the heater fixing plate as shown in the figure below, set the scanner dry heater, and then secure
the marking section with a binding band.
2. Extend the heater harness (tube section) and then secure one more place with a binding band. (Heater
fixing plate assy)
* Approach the binding band head to the square hole (mark) of the heater fixing plate.
* The binding band head and cut tip must not protrude behind the heater fixing plate.
* Tighten the biding band not to loosen and cut the tip by approx. 5 mm or less.
* The binding band head and cut tip must not protrude behind the heater fixing plate.
* Tighten the biding band not to loosen and cut the tip by approx. 5 mm or less.
- Page 7
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man51) service manuals if exist.