Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) Service Manual online
MX-2300/2700 N/G SIMULATION 7 – 14
5-3
Purpose
Operation test/check
Function (Purpose) Used to check the operation of the scanner
lamp and the circuit.
Section
Optical (Image scanning)
Item
Operation
Operation/Procedure
1) Press [OC COPY LAMP] button on the touch panel.
2) Press [EXECUTE] button.
1) Press [OC COPY LAMP] button on the touch panel.
2) Press [EXECUTE] button.
The target lamp is lighted for 10 sec.
5-4
Purpose
Operation test/check
Function (Purpose) Used to check the operation of the dis-
charge lamp and the related circuit.
Section
Process
Item
Operation
Operation/Procedure
1) Select the item to be checked with the buttons on the touch
1) Select the item to be checked with the buttons on the touch
panel.
2) Press [EXECUTE] button.
The selected discharge lamp is lighted.
6
6-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the paper
transport system, the transfer system, the
fusing system (clutches and solenoids) and
the control circuits.
fusing system (clutches and solenoids) and
the control circuits.
Section
Paper transport section (Transport, paper
exit)
exit)
Item
Operation
Operation/Procedure
1)
1)
Select the item to be checked with the buttons on the touch
panel.
panel.
2)
Press [EXECUTE] button.
The selected load operation is performed.
When [EXECUTE] button is pressed, the operation is termi-
nated.
The selected load operation is performed.
When [EXECUTE] button is pressed, the operation is termi-
nated.
(*): For the same loads displayed separately depending on normal
rotation and rotation, if they are selected together, normal rotation
is performed.
In addition, if the load is rotating, reverse rotation is not accepted
until the operation is stopped.
rotation and rotation, if they are selected together, normal rotation
is performed.
In addition, if the load is rotating, reverse rotation is not accepted
until the operation is stopped.
DL_K
Discharge lamp K
DL_C
Discharge lamp C
Same control
DL_M
Discharge lamp M
DL_Y
Discharge lamp Y
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
SIMULATION NO.05̆02
TEST
HEATER LAMP LOAD SETUP
HL_UM
HL_LM
HL_US
1/1
EXECUTE
0
CLOSE
HL_ALL
SIMULATION NO.05̆03
TEST
COPY LAMP CHECK
OC COPY LAMP
1/1
EXECUTE
0
CLOSE
0
EXECUTE
SIMULATION NO.05-04
TEST
DISCHARGE LAMP CHECK
1/1
DL_K
DL_C
DL_M
DL_Y
CLOSE
Transport/
imaging
imaging
PFM
Transport motor
RRM
Resist motor
POMF (*)
Paper exit motor normal rotation
POMR (*)
Paper exit motor reverse rotation
FUM
Fusing motor
CPFM
Cassette paper feed motor
OSM
Shifter motor
WTNM
Waste toner drive motor
CPFC
Cassette vertical transport clutch
1TURC
Primary transfer separation clutch
PCSS
Process control shutter solenoid
LSUSS1
LSU shutter solenoid 1
LSUSS2
LSU shutter solenoid 2
Paper feed
CLUM1
Cassette 1 lift-up motor
CPUC1
Cassette 1 paper feed clutch
CLUM2
Cassette 2 lift-up motor
CPUC2
Cassette 2 paper feed clutch
MPUC
Manual paper feed clutch
MPFS
Manual feed take-up solenoid
MPGS
Manual feed gate solenoid
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
CLOSE
0
SIMULATION NO.06̆01
TEST
FEED OUTPUT CHECK
EXECUTE
1/2
PFM
FUM
CPFM
OSM
CPFC
1TURC
PCSS
WTNM
CLUM1
CPUC1
CLUM2
CPUC2
MPUC
RRM
POMF
POMR
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) service manuals if exist.