Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) Service Manual online
MX-2300/2700 N/G SIMULATION 7 – 18
9
9-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and detectors in the duplex section
and its control circuit.
and its control circuit.
Section
Duplex
Item
Operation
Operation/Procedure
The sensor and detector operation conditions are displayed.
The active sensors and detectors are highlighted.
The sensor and detector operation conditions are displayed.
The active sensors and detectors are highlighted.
9-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the loads
in the duplex section and the control cir-
cuits.
cuits.
Section
Duplex
Item
Operation
Operation/Procedure
1) Select the item to be operation tested with the buttons on the
1) Select the item to be operation tested with the buttons on the
touch panel.
2) Press [EXECUTE] button.
The selected load operation is performed.
When [EXECUTE] button is pressed, the output is terminated.
When [EXECUTE] button is pressed, the output is terminated.
10
10-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the toner
motor and the related circuit.
Section
Process (Developing)
Item
Operation
Operation/Procedure
* Before execution of this simulation, remove the toner cartridges.
1)
* Before execution of this simulation, remove the toner cartridges.
1)
Select the item to be checked with the buttons on the touch
panel.
panel.
2)
Press [EXECUTE] button.
* The selected load operation is performed for 10 sec.
* When [EXECUTE] button is pressed, the operation is termi-
* The selected load operation is performed for 10 sec.
* When [EXECUTE] button is pressed, the operation is termi-
nated.
13
13--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag "U1" trouble.
Section
Section
FAX
Item
Trouble
Operation/Procedure
1)
1)
Press [EXECUTE] button.
2)
Press [YES] button to execute cancellation of the trouble.
DSW_ADU
ADU transport open/close detection
APPD1
ADU transport path detection 1
APPD2
ADU transport path detection 2
ADUM_L
ADU motor lower
0
ADU SENSOR CHECK
1/1
CLOSE
SIMULATION NO.09㧙02
TEST
1/1
DSW_ADU
APPD1
APPD2
0
SIMULATION NO.09-03
TEST
ADU LOAD CHECK
EXECUTE
1/1
ADUM_L
CLOSE
TNM_K
Toner motor K
TNM_C
Toner motor C
TNM_M
Toner motor M
TNM_Y
Toner motor Y
0
SIMULATION NO.10-01
TEST
TONER MOTOR ACTIVATION
EXECUTE
1/1
TNM_K
CLOSE
TNM_C
TNM_M
TNM_Y
0
SIMULATION NO.13
TEST
U1 TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) service manuals if exist.