Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) Service Manual online
MX-2300/2700 N/G SIMULATION 7 – 10
2-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and detectors in the automatic docu-
ment feeder unit and the related circuits.
ment feeder unit and the related circuits.
Section
RSPF
Item
Operation
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
NOTE: SWD_LEN and SWD_AD are not ON/OFF display.
2-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the loads
in the automatic document feeder unit and
the control circuits.
the control circuits.
Section
RSPF
Item
Operation
Operation/Procedure
1)
1)
Select the item to be checked with the buttons on the touch
panel.
panel.
2)
Press [EXECUTE] button.
The selected load operation is performed.
When [EXECUTE] button is pressed, the operation is termi-
nated.
The selected load operation is performed.
When [EXECUTE] button is pressed, the operation is termi-
nated.
*1: Since the stamp solenoid is an option unit, it can be operated
only when it is installed.
* For the same loads displayed separately depending on normal
only when it is installed.
* For the same loads displayed separately depending on normal
rotation and rotation, if they are selected together, normal rota-
tion is performed.
In addition, if the load is rotating, reverse rotation is not accepted
until the operation is stopped.
tion is performed.
In addition, if the load is rotating, reverse rotation is not accepted
until the operation is stopped.
3
3-2
Purpose
Operation test/check
Function (Purpose) Used to check the operation of sensor and
detector in the finisher and the related cir-
cuit.
cuit.
Section
Finisher
Item
Operation
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
<Saddle finisher>
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
<Saddle finisher>
Button
display
Content
Selectable
magnification ratio
Default
value
50
Scan magnification ratio:
50%
50%
COLOR: 50%, 100%,
200%
BLACK (High speed):
100%, 200%
BLACK (Low speed):
50%, 100%, 200%
200%
BLACK (High speed):
100%, 200%
BLACK (Low speed):
50%, 100%, 200%
100%
100
Scan magnification ratio:
100%
100%
200
Scan magnification ratio:
200%
200%
SSET
SPF installation detection
SOCD
SPF open/close detection
SCOV
SPF cover SW
SPED
SPF document empty detection
SPPD1
SPF paper entry detection 1 and random detection
(common)
(common)
SPPD2
SPF paper entry detection 2 PS front
SPPD3
SPF before-scan detection
SPPD4
SPF Reverse gate front detection
SPPD5
SPF Reverse rear detection
SPLS1
SPF Document length detection short
SPLS2
SPF Document length detection long
STMPU
SPF stamp unit installation detection
SWD_LEN
SPF guide plate position
SWD_AD
SPF document detection volume output
CLOSE
BLACK(SLOW)
0
SIMULATION NO.02-01
RSPF AGING
TEST
EXECUTE
150
200
ZOOM
100
%
BLACK(FAST)
COLOR
2-SIDE
1-SIDE
25
50
100
300
400
0
RSPF SENSOR CHECK SWD_LEN: **** SWD_AD: ***
1/1
CLOSE
SIMULATION NO.02-02
TEST
1/1
SSET
SOCD
SCOV
SPED
SPPD1
SPPD2
SPPD3
SPPD4
SPPD5
SPLS1
SPLS2
STMPU
SPFM
SPF transport motor
SPRM_F
SPF paper feed reverse motor normal rotation
SPRM_R
SPF paper feed reverse motor reverse rotation
SPFC
SPF paper feed clutch
SRRC
SPF resist roller clutch
SGS
SPF document exit gate solenoid
STMPS
Finish stamp solenoid (*1)
FJPID
Interface transport unit entry port detection
FJPOD
Interface transport unit exit port detection
FJPDD
Interface transport unit cover detection
FED
Entry port paper detection
FPDHPD
Paddle HP detection
FARHPD
Bundle roller HP detection
FFJHPD
Alignment plate HP detection front
FRJHPD
Alignment plate HP detection rear
FAD
Alignment tray detection
FOBHPD
Discharge belt HP detection
FBED
Tray paper detection
FSLD
Paper surface detection
FFPD
Binding position detection
FFHPD
Binding HP detection
FFRHPD
Binding roller HP detection
FFED
Binding paper detection
FFE
Binding lock detection
FULD
Lift upper limit detection
FLLD
Lift lower limit detection
FLE
Lift lock detection
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
SIMULATION NO.02̆03
TEST
RSPF OUTPUT CHECK
SPFM
SPRM_F
SPRM_R
SPFC
SRRC
SGS
1/1
EXECUTE
0
STMPS
CLOSE
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) service manuals if exist.