DM-2000 (serv.man7). DM2000 Service Manual-Trouble Code List User Setup - Sharp Copying Equipment Service Manual (repair manual). Page 10

For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.

Program name

Parameters

Auto clear time

0

OFF

1

30sec

2

60sec

∗3 90sec

4

120sec

5

10sec

Preheat mode

0

OFF

1

30sec

2

60sec

∗ 3

90sec

4

120sec

Auto power shut-off timer

∗ 1

30min

2

60min

3

90min

4

120min

5

240min

Stream feeding mode

∗ 0

OFF

1

ON

Auto power shut-off setting

0

OFF

∗  1

ON

Border line for 2 in 1 or 4 in 1

∗ 0

OFF

1

ON

Rotation copy

0

OFF

∗  1

ON

Auto paper select mode

0

OFF

∗  1

ON

Auto tray switching

0

OFF

∗  1

ON

Erase width adjustment

0

0"

1

1/4"

∗ 2

1/2"

3

3/4"

4

1"

Layout in 2 in 1 copy

∗ 1

Pattern 1

2

Pattern 2

Layout in 4 in 1 copy

∗ 1

Pattern 1

2

Pattern 2

3

Pattern 3

4

Pattern 4

Offset of paper output tray

0

Upper OFF,

lower OFF

∗  1

Upper ON,

lower ON

2

Upper ON,

lower OFF

3

Upper OFF,

lower ON

Factory default settings are indicated with an asterisk (

∗).

Note: If you select "0" (OFF) in a program, the corresponding function

will be disabled.

5) Press the START key.

● The right-hand number in the copy quantity display will be

steadily lit and the entered value will be stored.

6) To continue with other user programs, press clear the key and

then repeat steps 2 to 5. To exit the user program mode, press
the light (   ) key.
● All the alarm indicators will go out.

Settings for auditing accounts

If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account
numbers can be assigned. Use program No. 11 to register account
numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON)
will blink on the right side of the copy quantity display.

1) Select the desired setting using the numeric keys.

0: OFF
1: ON

2) Press the START key.

● The setting will be stored.

3) To continue with other user programs, press the clear key and

enter another program number. To exit the user program mode,
press the light (   ) key.

Program No. 11 is used to register accounts. When program No. 11 is
entered,

1) Enter a 3-digit account number using the numeric keys.

● Any 3-digit number except "000" can be registered as an ac-

count number.

2) Press the START key.

● If a number that is already registered or "000" is entered, the

number will blink in the copy quantity display.

3) Repeat steps 1 and 2 for other account numbers.
4) To continue with other user programs, press the clear key and

enter another program number. To exit the user program mode,
press the light (   ) key.

Program No. 12 is used to change account numbers. When program
No. 12 is entered, an account number will appear in the copy quantity
display.

● If no account number has been registered, "12E" will appear in

the copy quantity display. Press the clear key. The system will
return to step 2.

1) Use the copy ratio display % key to select the account number to

be changed.
● Use the % key to advance through the account numbers.

2) Press the START key.

● The account number will be erased and "- - -" will blink in the

copy quantity display.

3) Enter a new account number using the numeric keys.
4) Press the START key.

● If a number that is already registered or "000" is entered, the

number will blink in the copy quantity display.

5) Repeat steps 1 to 4 for other account numbers.
6) To continue with other user programs, press the clear key and

enter another program number. To exit the user program mode,
press the light (   ) key.

● If no account number has been registered, "13E" will appear in

the copy quantity display. Press the clear key. The system will
return to step 2.

1) To delete an individual account, press the 0 key.

To delete all accounts, press key 1.

2) Press the START key.

● If you have pressed the 0 key in step 1, an account number will

appear in the copy quantity display. Proceed to step 3).

● If you have pressed key 1, all account numbers will be deleted.

Proceed to step 5).

3) Use the copy ratio display % key to select the account number to

be deleted.
● Use the % key to advance through the account numbers.

DM-2000

10  –  2