Read Sharp DM-2000 (serv.man7) Service Manual online
4) Press the START key.
● The specified account will be deleted.
5) To continue with other user programs, enter another program
number. To exit the user program mode, press the light ( ) key.
E. Program No. 14: Number of copies per account
● If no account number has been registered, "14E" will appear in
the copy quantity display. Press the clear key. The system will
return to step 2.
return to step 2.
1) Use the copy ratio display % key to select the account number.
● Use the % key to advance through the account numbers.
2) Press and hold down the 0 key.
● The number of copies made against the specified account num-
ber will be displayed. The two higher digits and the three lower
digits will appear alternately while the 0 key is pressed.
digits will appear alternately while the 0 key is pressed.
Example: 1,234 copies
● The upper limit for the number of copies is 49,999. If the num-
ber of copies made reaches 50,000, the number will be reset to
0 and counting will start again from 0.
0 and counting will start again from 0.
3) Repeat steps 1 and 2 for other account numbers.
4) To continue with other user programs, press the clear key and
4) To continue with other user programs, press the clear key and
select another program number. To exit the user program mode,
press the light % key.
press the light % key.
F. Program No. 15: Resetting account
● If no account number has been registered, "15E" will appear in
the copy quantity display. Press the clear key. The DM Sytem
will return to step 2.
will return to step 2.
1) To reset an individual account, press the 0 key.
To reset all accounts, press key 1.
2) Press the START key.
● If you have pressed the 0 key in step 1, an account number will
appear in the copy quantity display. Proceed to step 3.
● If you have pressed key 1, the number of copies against all ac-
count numbers will be reset. Proceed to step 5.
3) Use the copy ratio display % key to select the accountnumber to
be reset.
● Use the % key to advance through the account numbers.
● Use the % key to advance through the account numbers.
4) Press the START key.
● The number of copies against the specified account number will
be reset.
5) To continue with other user programs, enter another program
number. To exit the user program mode, press the light % key.
DM-2000
10 – 3
Click on the first or last page to see other DM-2000 (serv.man7) service manuals if exist.