DM-2000 (serv.man7). DM2000 Service Manual-Trouble Code List User Setup - Sharp Copying Equipment Service Manual (repair manual). Page 13

5) After choosing the required value, press the ENTER key.

● The new value is registered.

∗ The bold values in the following items show the default values

of factory setting.

Item

Possible

Settings

Description

Copies

1 

∼ 999

Sets how many copies to print.

Resolution

300 dpi

Sets the printing resolution.

Smoothing

On
Off

Sets whether smoothing is done or not.
This function improves the appearance
of printed documents by smoothing the
angles and curves of images. This
allows printing at a higher apparent
resolution. For example, if the printer is
set to 600 dpi, resolution equivalent to
1200 dpi can be achieved.
When printing image data, you may
need to select “Off” to achieve best
results.

Toner
Save

On

Sets whether toner save mode is in
effect or not. This function prints
slightly fainter to save toner. This item
is different from the copier “toner save
mode”.

Page
Protection

On

Sets page protection. Page protection
is a function designed to prevent data
loss errors when complex data is
printed.
This menu item is displayed only if the
installed printer memory is 24 MB or
more.
Display is made only when the duplex
function is available.

2-Sided
Printing

Book

Tablet

When set to “Book” or “Tablet,” the
duplex function operates.
When set to “Book,” printing is made
normally (upside to upside).
When set to “Tablet,” printing is made
upside down.
Display is made only when the duplex
function is available.

Paper
Source

Tray 1

Tray 2

∗

Tray 3

∗

Tray 4

∗

Bypass

Tray

Sets the tray used for paper feeding.
Setting to “Auto” automatically selects
the paper tray loaded with the paper of
the size specified in the “Paper Size”
item.
∗ The available settings reflect the
installed trays.

Item

Possible

Settings

Description

Paper
Size

A3
B4

∗

B5
A5

Ledger

Legal

Letter

∗

Executive

Folio

Invoice

Foolscap

COM-10

DL
C5

Sets the size of the paper where data
will be printed. If this size is different
from the paper size present in the tray,
the size set on the operation panel
takes precedence. 
∗ Depending on where the printer was
purchased, the default value is either
A4 or Letter.

Orientation

Portrait

Landscape

Sets the page orientation for printing.
Specify  “Portrait” to print the paper with
its long side (longer edge) vertical.
Specify  “Landscape” to print the paper
with its long side (longer edge)
horizontal.

Emulation

Auto

PCL
PS2

HEX

Specifies the printer language used.

Item

Setting Choice

Description

Set IP Address

Yes

Sets the IP address.

Set Subnet Mask

Yes

Sets the subnet
mask.

Set Default Gateway

Yes

Sets the default
gateway.

Enable TCP/IP

YES

Enable/Disable
TCP/IP

Enable Netware

YES

Enable/Disable
Netware

Enable EtherTalk

YES

Enable/Disable
EtherTalk

Reset to Defaults

YES

Reset Print Server
Card to default.

∗ Displayed only if the optional Network Interface Control card is in-

stalled.

Item

Setting Choice

Description

I/O Time Out

1 second

:

:

999 second

Sets I/O time-out. If
no data is received
within the preset
time, print
processing is ended.

Item

Description

Configuration Page

Prints the configuration page.

PCL Font List

Prints the PCL font list.

PS2 Font List

Prints the PS2 font list.

Item

Setting Choice

Description

Print PS2 Error

On
Off

When set to “On”, PS
error print is made.

DATA

NE

MENU

ITEM

ENTER

DM-2000

10  –  5