AR-SP2 (serv.man2). ARSP2-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 5

Remove the fixing tape.

Set a document on the automatic document feeder and make a copy.

Then set a document on the document glass and make a copy.

*

If the copy magnification ratio of the copy made with the automatic
document feeder is shifted compared with the copy image made
with the document glass, perform the following procedure.

1. Execute SIM 48-5 with the key operations on the copier.

2. Enter the set value with the keys on the operation panel to per-

form the magnification ratio adjustment, and make a copy with the
automatic document feeder again to check that the magnification
ratio is proper.

After completion of the adjustment, press the

key  to  cancel  the

mode.

Set a document on the automatic document feeder and make a copy.

*

If the center of the copy image is shifted, perform the following
procedure.

1. Execute SIM 50-16 with the key operations on the copier.

2. Enter the set value with the keys on the operation panel to per-

form the center shift adjustment, and make a copy again to check
that the center is not shifted.

•

When the set value is increased, the image is shifted to the
rear side.

•

When the set value is decreased, the image is shifted to the
front side.

After completion of the adjustment, press the

key  to  cancel  the

mode.

Set a document on the automatic document feeder and make a copy.

Then set document on the document glass and make a copy.

*

If the lead edge of the copy image made with the automatic docu-
ment feeder is shifted from that made with the document glass,
perform the following adjustment.

1. Execute SIM 52-16 with the key operations on the copier.

2. Select the SPF item on the display with [

↑

] and [

↓

] keys.

3. Enter the set value with the keys on the operation panel to per-

form the lead edge adjustment, and make a copy to check that
the lead edge is not shifted.

•

When the set value is increased, the copy image moves for-
ward.

•

When the set value is decreased, the copy image moves back-
ward.

After completion of the adjustment, press the

key  to  cancel  the

mode.

0

4

8

0

5

[Program key]

C

CA

0

5

0

1

[Program key]

C

6

Center line of image

Center line 
of paper

Center line of image

Center line 
of paper

CA

0

5

2

1

[Program key]

C

6

CA

– 4 –