AR-SP2 (serv.man2). ARSP2-Service Manual - Sharp Copying Equipment Service Manual (repair manual)

ar-sp2 (serv.man2) service manual
Model
AR-SP2 (serv.man2)
Pages
19
Size
1013.41 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / ARSP2-Service Manual
File
ar-sp2-sm2.pdf
Date
Next: Sharp AR-SP2 (serv.man3) Parts Guide

Read Sharp AR-SP2 (serv.man2) Service Manual online

CODE: 00ZARSP2//A1E
Digital copier
Single Pass Feeder
(SPF)
MODEL
 AR-SP2
SHARP CORPORATION
Parts marked with "
!
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
[1]  PRODUCT OUTLINE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
[2]  SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
[3]  UNPACKING AND INSTALLATION  . . . . . . . . . . . . . . . . . . . . . . . . . 1
[4]  EXTERNAL VIEW AND INTERNAL STRUCTURE  . . . . . . . . . . . . . 5
[5]  OPERATIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
[6]  DISASSEMBLY AND ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . 7
[7]  MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
[8]  ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CONTENTS
[1] PRODUCT OUTLINE
This unit is installed to the top of the copier to feed document auto-
matically. Documents are automatically transported to the copier to
allow continuous copying. 
[2] SPECIFICATIONS
Document set
direction 
Face up
Document set
position
Center reference
Document transport
system
Sheet through type
Document feed
sequence
Top take\up
Document size
AB series: A3 
∼
 A5
Inch series: 11 
×
 17 
∼
 8.5 
×
 5.5
Document weight
56 
∼
 90g/cm
2
Document set
quantity
30 sheets (30 sheets, 90 g/cm
2
)
Max. thickness 4mm
Dimensions
583mm (W) 
×
 435mm (D) 
×
 131mm (H)
Weight
About 5.4 Kg
Power source
Supplied from the copier.
Document size
detection
Document feed tray upper
Detection size
Japan: A3, B4, A4, A4R, B5, B5R
Inch series: 11 
×
 17, 8.5 
×
 14, 8.5 
×
 11, 8.5 
×
 11R,
8.5 
×
 5.5
EX AB series: A3, B4, A4, A4R, A5
Multi copy
Models without memory:
 S 
→
 S unavailable
S 
→
 D unavailable
(Duplex copy model only)
Models with memory copy:
 S 
→
 S allowed
S 
→
 D unavailable
(Duplex copy model only)
With the electronic sort board:
 S 
→
 S allowed
S 
→
 D allowed
(Duplex copy model only)
Document mixture
Mixture paper feed:
  Copy mode:  Unavailable
  FAX mode: Allowed (Same width)
Random paper feed
Unavailable
Document reverse
None
Display section
(LED)
None
Document
replacement speed
S 
→
 S: 16-sheet machine
16 sheets/min (Document replacement rate 
100%)
20-sheet machine
18 sheets/min (Document replacement rate
90%)
[3] UNPACKING AND
INSTALLATION 
1. Unpacking
2. Installation
(1) Package contents
Name
Quantity
OC matt
1
SPF glass holding cover
1
SPF harness
1
Step screw
2
Installation Manual
1
1) Remove the document cover.
Lift the document cover and remove it from the copier.
– 1 –
2) Remove the rear cabinet of the copier.
Remove the screws and remove the cabinet.
Remove the connector cover.
*
If the open/close detection is attached, be careful not to break the
actuator.
3) Remove the right cabinet.
Remove the screws.
4) Remove the document glass holder (left side) and the
document glass.
Remove the screws and carefully remove the document glass holder
(left side) and the document glass together.
5) Remove the document glass holder cover (right side).
Remove the screws.
6) Attach the cushion.
*
Attach the cushion so that it does not extend from the edge of the
plate.
7) Attach the SPF glass holder cover.
Attach the document glass holder (left side) and the document glass
in the reverse procedure of 3), and fix them with the screws which
were removed in procedure 4.
– 2 –
8) Install the SPF to the copier.
Tilt the SPF backward and insert into the hinge guide.
9) Set the document matt.
Remove the seals of the SPF side duplex tape.
Remove duplex tape seal of the document matt.
Set the document matt to the following reference position.
*
The document matt must not cover the glass holder plate and the
front cabinet.
10) Fit and attach the SPF and the document matt
together.
Tilt the SPF and attach with duplex tape.
Be careful that the document matt must not be shifted.
11) Remove the copier shield plate.
Remove the screws.
12) Install the SPF harness (Included together with the
unit).
Pass the harness through the plate hole from the above, and connect
it to the main PWB connector (CN11) inside the copier.
Fix it with the hex cap screws.
13) Install the SPF connector.
Connect the interface harness extended from the SPF, and fix with
the hand screws.
– 3 –
Page of 19
Display

Download Sharp AR-SP2 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sharp AR-SP2 (serv.man2) Service Manual in PDF. AR-SP2 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-SP2 (serv.man2) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-SP2 (serv.man2) Service Manuals

Preview DownloadPagesSize
AR-SP2 (serv.man3) ARSP2-Parts Guide Parts Guide 12 476.7 KB
AR-SP2 ARSP2-SPECIFICATIONS Specification 1 23.87 KB
AR-SP2 (serv.man29) 1.Countermeasure Against Folded Original Detection Error When Using The SPF. 2.Change Of Separator Tray Sheet. (WHITE) Technical Bulletin 2 39.44 KB
AR-SP2 (serv.man28) Correction To The Parts Guide. (WHITE) Technical Bulletin 2 234.48 KB
AR-SP2 (serv.man27) 1.Increase Of Sucking Force Of PU Solenoid. 2.Shape Change Of Stopper Arm. 3.Shape Change Of Base Plate Rib Sheet. (WHITE) Technical Bulletin 2 77.85 KB
AR-SP2 (serv.man26) Prevention Against Break Of SPF Interface PWB. (WHITE) Technical Bulletin 1 395.36 KB
AR-SP2 (serv.man25) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 70.19 KB
AR-SP2 (serv.man24) 1.Change Of The Fusing Lower Frame. 2.Change Of the SPF Rack Cover. 3.Countermeasure Against Poor Insertion Of The Motherboard Connector. 4.Change Of The Rubber Cushion. (WHITE) Technical Bulletin 3 85.17 KB
AR-SP2 (serv.man23) 1.Change Of The SPF Glass Sheet R. 2.Dimensions Change Of The PS Transport Roller. 3.Material Change Of The Copy Operation PWB. (WHITE) Technical Bulletin 3 92.52 KB
AR-SP2 (serv.man22) Information About The Parts Change. (WHITE) Technical Bulletin 6 259.94 KB
AR-SP2 (serv.man21) Supply of the paper feed roller as a service part. (WHITE) Technical Bulletin 1 126.36 KB
AR-SP2 (serv.man20) Shape change of the SPF glass sheet F and bearing change. (WHITE) Technical Bulletin 1 65.2 KB
AR-SP2 (serv.man19) Shape change of the original tray frame R. (WHITE) Technical Bulletin 1 74.17 KB
AR-SP2 (serv.man18) Parts change for the productivity improvement. (WHITE) Technical Bulletin 2 83.8 KB
AR-SP2 (serv.man17) Countermeasure against peeling of the white sheet. Technical Bulletin 1 81.37 KB
AR-SP2 (serv.man16) Support of double feed during cassette paper feed and document double feed. Technical Bulletin 4 203.3 KB
AR-SP2 (serv.man15) Parts change owing to use of the common parts. Technical Bulletin 2 76.99 KB
AR-SP2 (serv.man14) Parts change. Technical Bulletin 3 117.18 KB
AR-SP2 (serv.man13) New supply of a service part described in AR161 200 ref 079 Technical Bulletin 1 23.39 KB
AR-SP2 (serv.man12) Parts change Technical Bulletin 1 21.48 KB
AR-SP2 (serv.man11) Countermeasure against SPF feed jams Technical Bulletin 1 714.11 KB
AR-SP2 (serv.man10) Countermeasure against book sensor detection Technical Bulletin 2 280.82 KB
AR-SP2 (serv.man9) Parts change information for PS transport roller Technical Bulletin 1 13.27 KB
AR-SP2 (serv.man8) Setting the service part codes for the transport Technical Bulletin 1 11.95 KB
AR-SP2 (serv.man7) Discontinued Integration of the book sensor harness. Technical Bulletin 1 26.1 KB
AR-SP2 (serv.man6) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
AR-SP2 (serv.man5) CHANGE IN MATERIAL OF MANUAL PAPER FEED ROLLER MOUNTED TO SPF PAPER FEED SECTION. Technical Bulletin 2 148.3 KB
AR-SP2 (serv.man4) Details of Fast Facts 100 Damage to ARSP2 ARRP1 FAQ 1 100.4 KB

Random: