Read Sharp AR-SP2 (serv.man2) Service Manual online
2) Remove the rear cabinet of the copier.
Remove the screws and remove the cabinet.
Remove the connector cover.
*
If the open/close detection is attached, be careful not to break the
actuator.
actuator.
3) Remove the right cabinet.
Remove the screws.
4) Remove the document glass holder (left side) and the
document glass.
Remove the screws and carefully remove the document glass holder
(left side) and the document glass together.
(left side) and the document glass together.
5) Remove the document glass holder cover (right side).
Remove the screws.
6) Attach the cushion.
*
Attach the cushion so that it does not extend from the edge of the
plate.
plate.
7) Attach the SPF glass holder cover.
Attach the document glass holder (left side) and the document glass
in the reverse procedure of 3), and fix them with the screws which
were removed in procedure 4.
in the reverse procedure of 3), and fix them with the screws which
were removed in procedure 4.
– 2 –
Click on the first or last page to see other AR-SP2 (serv.man2) service manuals if exist.