Read Sharp AR-SP10 Service Manual online
AR-SP10/RP10 DISASSEMBLY AND ASSEMBLY
– 8 –
4) Pickup solenoid
Note: Remove section A of the pickup solenoid from the solenoid arm
groove.
When assembling, adjust the spacing between the clutch latch
and sleeve with the pick-up solenoid pulled. The size should be
the distance from the tip of the clutch latch and the root of the
clutch sleeve latch.
When assembling, adjust the spacing between the clutch latch
and sleeve with the pick-up solenoid pulled. The size should be
the distance from the tip of the clutch latch and the root of the
clutch sleeve latch.
5) Clutch gear assy
6) Pickup roller assy
Note: When assembling the pickup roller assy 4, check that rib A is on
the rib of the solenoid arm.
7) Pick up roller, paper feed roller
A
1
2
2.5 4.5mm
1
5
2
4
3
6
6
2.5~4.5
From Edge pawl
1
4
2
3
A
1
2
3
1
1
4
Click on the first or last page to see other AR-SP10 service manuals if exist.