Read Sharp AR-RP9 Service Manual online
AR-RP9/SP9/AR-D33 UNPACKING AND INSTALLATION 2 - 1
[2] UNPACKING AND INSTALLATION
1. AR-SP9/RP9 Installation
The installing procedures below are described for the AR-SP9. The
installing procedures for the AR-RP9 are the same as below.
installing procedures for the AR-RP9 are the same as below.
Turn the main switch to the “OFF” position and remove the power
plug from the outlet.
plug from the outlet.
1)
Remove the document cover.
Remove the document cover from the copier.
2)
Remove the rear cabinet.
Remove the three screws and then remove the rear cabinet.
3)
Replace the right glass holder (For Europe only).
<1> Remove the two screws, and remove the right exterior
OC.
<2> Attach the right glass holder, and fix it with the two screws
which was removed in the above procedure.
Installation manual: 1 sheet
•
Parts included
Right glass holder: 1 pc.
(For Europe only)
(For Europe only)
Screw (M3 x 8): 1 pc.
Screw (M3 x 6): 1 pc.
AR-SP9 Unit (SPF Unit)
AR-RP9 Unit (RSPF Unit)
"OFF"
Click on the first or last page to see other AR-RP9 service manuals if exist.