Read Sharp AR-PN1 Service Manual online
AR-FN7/PN1 UNPACKING AND INSTALLATION-1
[2] UNPACKING AND INSTALLATION
1. AR-FN7
<Before installation>
•For installation of the AR-FN7, the option desk (the AR-D13, a large-
capacity paper feed desk, or the AR-D14, a 3-stage paper feed desk)
and the duplex module (AR-DU3) must be installed in advance.
In addition, the power unit (AR-DC1) is also required.
In addition, the power unit (AR-DC1) is also required.
1) Turn off the main switch of the printer.
<1>Turn off the main switch on the front panel of the printer.
<2>Disconnect the power plug of the printer from the power outlet.
2) Attach the locking plate to the duplex module.
<1>Remove the fixing screw which is on the rear side of the duplex
module.
<2>Use a screwdriver (+) to make a hole through the installing hole in
the front side of the duplex module. Remove burrs with a screwdriver
(-) from the hole.
(-) from the hole.
<3>Install the locking plate to the duplex module with two fixing screws.
3) Process the paper feed desk.
<1>Release lock of the left adjuster at the left lower side of the paper
<1>Release lock of the left adjuster at the left lower side of the paper
feed desk, and remove the left adjuster.
<2>Use a screwdriver to make 4 holes through 4 installing holes of the
paper feed desk, and remove burs from the holes with a screwdriver
(-).
4) Attach a grounding plate to the paper feed desk.
<1>Remove two screws which are fixing the external cabinet of the
paper feed desk.
<2>Install the grounding plate F and the grounding plate R to the paper
feed desk with fixing screws (2pcs. for each).
5) Install the staple unit to the finisher.
<1>Open the front cabinet of the finisher, and insert the staple unit into
the finisher.
Plate A:
1pc.
Front cover:
1pc.
Locking plate:
1pc.
Screw A:
6pcs.
Screw B:
4pcs.
Screw D:
1pc.
Screw E:
2pcs.
Screw C:
8pcs.
Connecting
plate:
1pc.
Fixing plate:
1pc.
Grounding
plate F:
1pc.
Grounding
plate R:
1pc.
Plate F:
1pc.
Plate R:
1pc.
<Items packed together>
Tray:
1pc.
Staple unit:1pc.
"OFF"
Locking plate
Fixing screw
Fixing screw C
Fixing screw C
1
2
3
Mounting
hole
Mounting
hole
Left adjuster
Fixing
screw C
Fixing
screw C
External
cabinet
fixing screw
External
cabinet
fixing screw
Grounding plate R
Grounding plate F
! #$! %&'(
Click on the first or last page to see other AR-PN1 service manuals if exist.