Read Sharp AR-PE3 (serv.man6) User Guide / Operation Manual online
31
System software
7.
Select LPT 1: Printer Port from the list of available ports, and click Next.
8.
Accept the default printer name, select No to using the printer as the default printer,
and then click Next.
and then click Next.
9.
Select No to printing a test page and click Finish.
The generic printer is added to your computer.
10.
Click Start, choose Settings, and then choose Printers. Right-click the icon for the
generic printer, and choose Properties from the menu that appears.
generic printer, and choose Properties from the menu that appears.
The Properties dialog box for the generic printer appears.
Click the Details tab and make sure the field “Print to the following port” reads exactly as
follows: LPT 1: (ECP Printer Port).
follows: LPT 1: (ECP Printer Port).
If this field reads
LPT 1: (Printer Port)
instead of
LPT 1: (ECP Printer Port)
, the LPT1 port
settings in the BIOS for ECP mode have not been configured. Reboot the computer to
reenter the BIOS and set the parallel Port Mode to ECP. Compatibility mode works, but
the installation takes much longer.
reenter the BIOS and set the parallel Port Mode to ECP. Compatibility mode works, but
the installation takes much longer.
11.
Click Spool Settings, specify settings as described, and then click OK.
• Select “Spool print jobs so program finishes printing faster” and then select “Start
printing after first page is spooled.”
Selecting these options ensures no disruption from a parallel port timeout.
• If the option is available, select “Disable bi-directional support for this printer.”
• Choose RAW from the Spool data format menu.
12.
Click Port Settings, and select “Spool MS-DOS print jobs” and “Check port state before
printing,” and then click OK.
printing,” and then click OK.
Click on the first or last page to see other AR-PE3 (serv.man6) service manuals if exist.