Read Sharp AR-PE3 (serv.man6) User Guide / Operation Manual online
26
System software
T
O
ACCESS
THE
SERVICE
SWITCHES
AND
REASSEMBLE
THE
F
IERY
X3
E
C
AUTION
:
Wear an ESD grounding wrist strap and follow standard ESD (electrostatic
discharge) precautions while performing this procedure.
1.
Shut down the Fiery X3e.
To shut down properly at the Control Panel, touch:
OFFLINE key > Fiery icon > CONTROLLER SCREEN > Menu key > Shut Down >
Shut Down System. Wait for the message “READY TO POWER OFF THE PRINT
CONTROLLER SYSTEM” to appear, and then power off the Fiery X3e using the
dedicated Fiery X3e power switch on the Fiery X3e faceplate. For details, see page 6.
OFFLINE key > Fiery icon > CONTROLLER SCREEN > Menu key > Shut Down >
Shut Down System. Wait for the message “READY TO POWER OFF THE PRINT
CONTROLLER SYSTEM” to appear, and then power off the Fiery X3e using the
dedicated Fiery X3e power switch on the Fiery X3e faceplate. For details, see page 6.
2.
Power off the print engine using its main power switch and unplug the print engine from
the AC power outlet.
the AC power outlet.
If the print engine is plugged in, the Fiery X3e power supply is on even if both the
print engine and the Fiery X3e are powered off. To power off the Fiery power supply, you
must unplug the print engine.
print engine and the Fiery X3e are powered off. To power off the Fiery power supply, you
must unplug the print engine.
3.
Remove the lid from the Fiery X3e by removing 6 screws, unhooking the lid, and lifting
the lid off the pan. Set aside the lid and screws.
the lid off the pan. Set aside the lid and screws.
F
IGURE
O
Accessing the Fiery X3e service switches
4.
Flip both service switches. Avoid touching all other components.
5.
Reinstall the lid onto the Fiery X3e by hooking the lid onto the pan then using the 6
screws you removed earlier.
screws you removed earlier.
6.
Plug in the print engine to the AC power outlet.
Fiery X3e
Lid
Print engine
Normal (away from
the motherboard)
the motherboard)
Service (toward the
motherboard)
motherboard)
Service switches
Click on the first or last page to see other AR-PE3 (serv.man6) service manuals if exist.