Read Sharp AR-PE3 (serv.man6) User Guide / Operation Manual online
30
System software
T
O
SET
UP
THE
COMPUTER
1.
Access the computer BIOS and make sure that Parallel Port Mode is set to ECP.
Power on the computer and immediately press the key indicated on your monitor for
entering the BIOS (or a likely key if it is not indicated). Pressing a likely key repeatedly
(ESC, DEL, F1, or a combination) may interrupt the starting of Windows and access the
BIOS or give you directions for accessing the BIOS.
entering the BIOS (or a likely key if it is not indicated). Pressing a likely key repeatedly
(ESC, DEL, F1, or a combination) may interrupt the starting of Windows and access the
BIOS or give you directions for accessing the BIOS.
Once in the BIOS, you may have to scroll through several screens to reach the settings for
the parallel port. After setting the Parallel Port Mode to ECP, save your changes and exit
the BIOS.
the parallel port. After setting the Parallel Port Mode to ECP, save your changes and exit
the BIOS.
2.
In Windows, click Start, choose Settings, and then choose Printers.
3.
Double-click Add Printer.
The Add Printer wizard appears. Use this wizard to add a generic printer to
your computer.
your computer.
4.
Click Next.
5.
Select the Local Printer option, and click Next.
6.
Select Generic from the Manufacturers list, and click Next.
Click on the first or last page to see other AR-PE3 (serv.man6) service manuals if exist.