Read Sharp AR-PE3 (serv.man4) Service Manual online
33
System software
5.
At the MS-DOS prompt, type the following command but do not press the Enter key yet:
copy boot.efi lpt1 /b
/b
specifies the binary option (not ASCII).
N
OTE
:
Make sure to spell the file name correctly and include the file extension. Do not
press the Enter key yet.
6.
Power on the print engine and the Fiery X3e.
7.
When the message “INITIALIZING PRINT CONTROLLER. PLEASE WAIT” appears on the
Control Panel, press the Enter key on the computer.
Control Panel, press the Enter key on the computer.
The DOS-type window on the computer displays a message that one file was copied.
Ignore the pop-up time-out error messages on the computer or select Retry.
8.
At the computer, type the following command at the MS-DOS prompt but do not press the
Enter key yet:
Enter key yet:
copy system.efi lpt1 /b
/b
specifies the binary option (not ASCII).
N
OTE
:
Make sure to spell the file name correctly and include the file extension. Do not
press the Enter key yet.
9.
When OFFLINE appears in the top left corner of the Control Panel screen, touch the Fiery
logo.
logo.
N
OTE
:
It takes several minutes for this OFFLINE status screen to appear.
10.
At the FIERY PRINTER SCREEN, select CONTROLLER SCREEN.
Ignore the prompt, “Press any key to enter Config Mode.” if it appears.
11.
At the FIERY PRINTER SCREEN service menu, select Installation.
The message “Flushing parallel port. Please wait” appears on the Control Panel.
1.
2.
3.
2.
3.
A 4
A 4
8
1
/
2
X11
DUPLEX
PAPER SELECT
OFFLINE.
ONLINE
OFFLINE
OFFLINE
Fiery logo
FIERY PRINTER SCREEN
CONTROLLER SCREEN
REMOTE SCAN MODE
Click on the first or last page to see other AR-PE3 (serv.man4) service manuals if exist.