Read Sharp AR-PE3 (serv.man4) Service Manual online
34
System software
12.
When the message “Copy software to parallel port” appears on the Control Panel, press
the Enter key on the computer, and then select OK on the Control Panel.
the Enter key on the computer, and then select OK on the Control Panel.
Wait while the Fiery X3e Control Panel displays status messages indicating that the
Fiery X3e is downloading the file and installing the system software. Do not press any
keys during this time. This process can take over an hour depending on your computer.
Fiery X3e is downloading the file and installing the system software. Do not press any
keys during this time. This process can take over an hour depending on your computer.
13.
When the message “Installation was successful” appears on the Control Panel, press OK.
N
OTE
:
If the installation is not successful, clear the parallel port by opening the printer
driver on the computer and purging or canceling all print jobs. Restart the computer and
return to step 1 on page 32.
return to step 1 on page 32.
14.
With the print engine and the Fiery X3e powered off, flip the service switches to normal
mode (away from the motherboard).
mode (away from the motherboard).
To access the service switches and reassemble the Fiery X3e, use the procedure on
page 26.
page 26.
15.
Power on the print engine and the Fiery X3e. Allow the Fiery X3e to boot up.
The language screen appears on the Control Panel when the Fiery X3e starts up.
16.
Press the name of the language you want to use, and then press OK.
17.
If the Select Market Region screen is displayed, press the name of the region for the
Fiery X3e and then press OK.
Fiery X3e and then press OK.
This screen is displayed only if English was selected from the language selection screen.
18.
At the Setup screen, select Run Setup and press OK. Reenter the customer’s settings
from the Configuration page that you printed earlier.
from the Configuration page that you printed earlier.
Enter settings for Server, Network, and Printer Setup, in that order. Bypass the settings
not included on the Configuration page if it is more appropriate for the network
administrator to set them. For more information, see the User Software Installation Guide.
not included on the Configuration page if it is more appropriate for the network
administrator to set them. For more information, see the User Software Installation Guide.
19.
After all setup options are configured, select Exit Setup from the Setup screen, and
press OK.
press OK.
The Fiery X3e reboots with the updated system software and setup options.
20.
When the Fiery X3e reaches the Idle screen, exit MS-DOS at the computer and remove the
System Software CD from the CD-ROM drive.
System Software CD from the CD-ROM drive.
21.
Power off the Fiery X3e and remove the parallel cable.
Normal (away from
the motherboard)
the motherboard)
Service (toward the
motherboard)
motherboard)
Click on the first or last page to see other AR-PE3 (serv.man4) service manuals if exist.