Read Sharp AR-PB2A (serv.man7) Service Manual online
Hardware Specs
a. Base Memory
Value:
16 MB
Example:
16 MB
Default:
16 MB
Description: It indicates base memory quantity of the printer board.
Basically, this is fixed at 16 MB and it cannot be
changed.
changed.
b. Optional Memory
Value:
(0|16|32|48|64) MB
Example:
0MB
Default:
0MB
Description: It indicates the printer board’s optional memory quantity.
The customer (serviceman) could extend the memory
by attaching 72pin-SIMM. 0MB means optional memory
is not attached. 16MB or 32MB SIMM can be used to
this purpose.
by attaching 72pin-SIMM. 0MB means optional memory
is not attached. 16MB or 32MB SIMM can be used to
this purpose.
c. Total Memory
Value:
(16|32|48|64|80) MB
Example:
16MB
Default:
16MB
Description: It indicates the printer board’s total memory quantity. In
other words, it is summation of Base Memory and Op-
tion Memory.
tion Memory.
d. Copier HDD
Value:
4GB
Version Information
a. PRT
Value:
#.##
Example:
2.00
Default:
Depends on printer firmware version
Description: This number should be same as the PRT-PRG ROM
version number seen on serviceman simulation 22-5.
b. BOOT
Value:
#.##
Example:
2.00
Default:
Depends on printer firmware version
c. ICU
Value:
#.##
Example:
2.00
Default:
Depends on printer firmware version
Description: This number should be same as the ICU ROM version
number seen on serviceman simulation 22-5.
Installed Device
a. Duplex Module
Value:
(Yes | No)
Example:
Yes
Default:
Depends on the Machine configuration
Description: It indicates that duplex unit is attached or not.It depends
on hardware configuration.
b. Output Device
Value:
(Standard 1 Tray | Standard 2 Trays | 3 Tray Finisher|2
Tray Finisher)
Tray Finisher)
Example:
3 Tray Finisher
Default:
Depends on the Machine configuration
Description: It indicates attached output device.. It depends on
hardware configuration.
c. Paper Input Trays
Value:
(2 trays | 3 trays | 4 trays)
Example:
2 trays
Default:
Depends on the Machine configuration
Description: It indicates the number of standard input trays.It
depends on hardware configuration.
d. Large Capacity Tray
Value:
(Yes | No)
Example:
Installed
Default:
Depends on the Machine configuration
Description: It indicates that large capacity paper input tray(Large
Capacity Tray) is attached or not. It depends on
hardware configuration.
hardware configuration.
e. Interface Board
Value:
(None | Ethernet | TokenRing)
Example:
Ethernet
Default:
Depends on the Machine configuration
Description: It indicates the kind of installed network card option to
the slot. 10Base-T/2 and 10/100Base-T are not iden-
tified. Those two will be reported as Ethernet.
TokenRing would not be supported for AR-PB1 (AR-
PB2) for Japan domestic.
tified. Those two will be reported as Ethernet.
TokenRing would not be supported for AR-PB1 (AR-
PB2) for Japan domestic.
Available Paper Size
Appearance on
Configuration Page
Description
Letter (81/2x11)
Letter / Long Edge Feed
Letter (81/2x11R)
Letter / Short Edge Feed
Legal (81/2x14)
Legal / Short Edge Feed
Ledger (11x17)
Ledger / Short Edge Feed
Executive (7 1/4x101/2)
Executive / Short Edge Feed
Invoice (5 1/2x81/2)
Invoice / Long Edge Feed
Foolscap (81/2x13)
Foolscap / Short Edge Feed1
A4
A4 / Long Edge Feed
A4R
A4 / Short Edge Feed
B5
B5 / Long Edge Feed
B5R
B5 / Short Edge Feed
B4
B4 / Short Edge Feed
A3
A3 / Short Edge Feed
A5
A5 / Long Edge Feed
A6
A6 / Short Edge Feed
Japanese Postcard
Japanese Postcard / Short Edge Feed
(Unknown)
Other size (EXTRA)
(No Paper)
No paper available on this tray.
(No Tray)
There is a problem with this tray.
(Tray Open)
This tray is opened (except Bypass-Tray)
or Tray is lifting up.
a. Tray 1 / Tray 2 / Tray 3 / Tray 4
Value:
[Appropriate Paper Size]
Example:
Letter (81/2x11)
Default:
Depends on paper tray configuration.
Description: It indicates paper size configuration of Tray 1 /2 / 3 / 4 /
5. It depends on hardware configuration, not software
condition.
(Unknown) means paper size cannot be identified. (Tray
configuration is "EXTRA".)
This line is not printed for unavailable tray.
condition.
(Unknown) means paper size cannot be identified. (Tray
configuration is "EXTRA".)
This line is not printed for unavailable tray.
AR-PB2A
5 – 2
Click on the first or last page to see other AR-PB2A (serv.man7) service manuals if exist.