AR-PB2A (serv.man7). ARPB2A-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 17

1. Press the PRINT key to select the printer mode. Make sure the

PRINT indicator lights up and the basic screen is displayed on the
touch panel.

2. Press the "ONLINE" key on the touch panel to select the OFFLINE

mode and press the "MENU" key.

The printer configuration menu screen will appear on the touch panel.
The main menu items are: PRINTER SETTINGS, INTERFACE SET-
TINGS, NETWORK SETTINGS, PRINT TEST PAGE, and INITIALIZE
AND/OR STORE SETTINGS. Use the UP/DOWN arrow (

▲

, 

▼

) keys

to scroll the screen.

NOTES: If any printing data remains in the memory, the printer con-

figuration menu will not appear. In this case, access the
printer configuration menu after printing is complete or
press the CLEAR (



) key to cancel printing and then con-

tinue to access the menu.
If conflicting settings are made with the printer driver and
the configuration menu, the printer driver will have priority.

3. Select the desired main menu item on the touch panel.

4. If a sub-menu appears, select the desired function. To scroll the

touch panel screen, use the UP/DOWN arrow (

▲

, 

▼

) keys.

5. Turn the setting of a function on or off by pressing its correspond-

ing check box in front of the function name. For functions without a
check box, adjust the settings on each function setting screen.

6. To exit the configuration menu, return to the main menu by press-

ing the "OK" key and then press the "ONLINE/OFFLINE" key to
return to the online mode.
If a test print has been selected, once complete, the printer will
automatically return to the online mode.

A flow chart of the printer configuration menu is shown. The menu
structure changes depending on whether a network interface card is
present in the copier/printer or not. The menus inside the gray area
are for a copier/printer with a network interface card (Print Server
Card) installed. 

NOTE: Depending on the particular printer, some functions of the

printer configuration menu cannot be set, for example,
smoothing and toner save mode.

NOTES: The menus inside the gray area are for a printer with the

network interface card option installed.

*  Denotes the default setting.

•

The default setting of STANDARD INPUT PAPER SIZE
depends on the countries or regions.

•

The default setting of STANDARD OUTPUT TRAY
depends on installation of optional finisher.

•

The values indicated with IP ADDRESS are examples.

Main  Menu
PRINTER SETTINGS
INTERFACE SETTINGS
NETWORK SETTINGS
PRINT TEST PAGE
INITIALIZE AND/OR STORE
SETTINGS

PRINTER SETTINGS
SMOOTHING
TONER SAVE MODE
COPIES
ORIENTATION
STANDARD INPUT PAPER
SIZE
STANDARD OUTPUT TRAY
PRINT PS ERRORS
PCL SYMBOL SET SETTING

PARALLEL PORT EMULATION 
SWITCHING
AUTOMATIC*
PostScript
PCL

COPIES  (1* to 999)

ORIENTATION
PORTRAIT*
LANDSCAPE

STANDARD INPUT PAPER SIZE
A3  B4  A4*  B5  A5  A6
11 x 17  8-1/2 x 14  8-1/2 x 13  
8-1/2 x 11*
5-1/2 x 8-1/2  7-1/2 x 10-1/2

STANDARD OUTPUT TRAY
TOP TRAY
SECOND TRAY*

IP ADDRESS SETTING
IP ADDRESS (192 168 0 1)
IP SUBNET MASK (255 255 255  0)
IP GATEWAY (192 168 0 1)

PORT SWITCHING METHOD
SWITCH AT END OF JOB*
SWITCH AFTER I/O TIMEOUT
DISABLE PARALLEL PORT
DISABLE NETWORK PORT

I/O TIMEOUT (1 to 999, 20*) 

NETWORK PORT EMULATION 
SWITCHING
AUTOMATIC*
PostScript
PCL

NETWORK SETTINGS
ENABLE TCP/IP
IP ADDRESS SETTING
ENABLE NetWare
ENABLE EtherTalk 
(TokenTalk)
PRINT NIC PAGE AT
POWER ON

INTERFACE SETTINGS
HEXADECIMAL DUMP MODE
PARALLEL PORT
EMULATION SWITCHING
NETWORK PORT
EMULATION SWITCHING
I/O TIMEOUT
PORT SWITCHING METHOD

PRINT TEST  PAGE
PRINT CONFIGURATION 
PAGE
PRINT RESIDENT FONT 
LIST
PRINT DEMO PAGE
PRINT NIC PAGE
PRINT PCL SYMBOL 
SET LIST

INITIALIZE AND/OR STORE
SETTINGS
RESTORE FACTORY
DEFAULT
STORE CURRENT
CONFIGURATION
RESTORE CONFIGURATION
RESET THE NIC

AR-PB2A

4 – 1