AR-PB2A (serv.man7). ARPB2A-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 19

Printing a test page verifies that the printer operates properly. Also
you can check the configuration settings, built-in fonts etc. When
printing is complete, the printer will exit the printer configuration menu
and return to online mode.

PRINT
CONFIGURATION
PAGE

If this key is pressed, the printer will return
to the online mode and print the
configuration list.

PRINT RESIDENT
FONT LIST

If this key is pressed, the printer will return
to the online mode and print the resident
font list.

PRINT DEMO PAGE If this key is pressed, the printer will return

to the online mode and print a
demonstration page.

PRINT NIC PAGE

If this key is pressed, the printer will return
to the online mode and print the NIC
(Network Interface Card) configuration
page. If an optional network interface card
(Print Server Card) is not installed, this
function will not appear on the touch panel.

PRINT PCL
SYMBOL SET LIST

If this key is pressed, the printer will return
to the online mode and print the PCL
symbol set list.

Use these functions to initialize or store printer settings.

RESTORE
FACTORY
DEFAULTS

When this key is pressed, a confirmation
window will appear. If the "YES" key is
pressed, all the printer configuration
settings will return to the factory default
settings.

STORE CURRENT
CONFIGURATION

When this key is pressed, a confirmation
window will appear. If the "YES" key is
pressed, the current printer configuration
settings will be stored in the printer’s
nonvolatile memory.

RESTORE
CONFIGURATION

When this key is pressed, a confirmation
window will appear. If the "YES" key is
pressed, the printer configuration settings
that have been stored in the printer’s
nonvolatile memory with the "STORE
CURRENT CONFIGURATION" function will
be recalled.

RESET THE NIC

When this key is pressed, a confirmation
window will appear. If the "YES" key is
pressed, the settings of the optional
network interface card will return to the
factory default settings.

NOTES: If configuration settings are protected using key operator

programs (Prohibit Changes to Printer Settings and Prohibit
Changes to Interface Settings), the settings cannot return
to the factory default setting and stored settings cannot be
recalled.

Use the key operator programs to cancel protection mode.

If the setting of functions of enabling protocols (ENABLE
TCP/IP, ENABLE NetWare, and ENABLE EtherTalk) is
changed by using the function "RESTORE FACTORY
DEFAULTS" or "RESTORE CONFIGURATION", the new
setting will be effective after resetting the printer. To reset
the printer, turn off the printer and then turn it on after a few
seconds.

The "Restore Factory Defaults" setting does not restore
network settings. To return the network settings to the fac-
tory default settings, use the "RESET THE NIC" function. 

PROGRAM NAME

FUNCTION

Printer Exposure Level

Lightens or darkens printouts.

Memory Reserved for
Printer

Specifies percentage of document
memory allocated to storage of printer
jobs. 
(AR-250 (1GB hard disk model) only)

Output Method When
Memory Is Full

Specifies whether one set or multiple
sets will be printed when the printer
memory becomes full.

Set the Number of
Confidential Print Jobs to
Be Stored

Specifies the maximum number of
confidential print jobs that can be
stored in the printer and the maximum
number of pages in a job.

Enable Bypass-Tray Size
Detection

Enables or disables paper size
detection for the bypass tray.

Give Priority to Print
Speed in Staple Mode

Specifies an image processing method
for printing with stapling. 
(AR-505/507 only)

Prohibit Notice Page
Printing

Specifies whether a notice page will be
printed when the printer memory
becomes full and divided printing is
performed.

Prohibit Rotated Output

Enables/disables rotation of print
image for printing onto A4R or 8-1/2" x
11"R paper.

Prohibit Bypass-Tray
Selection

Enables/disables bypass tray selection
in the ‘Auto Tray Switching’ mode.

Prohibit Auto Tray
Switching

Enables/disables automatic switching
between paper trays during printing
when paper runs out.

Prohibit Test Page
Printing

Enables/disables test page printing
from the printer configuration menu.

Prohibit Changes to
Printer Settings

Prohibits modification of basic printer
settings in the printer configuration
menu.

Prohibit Changes to
Interface Settings

Prohibits modification of interface
settings in the printer configuration
menu.

Prohibit Changes to
Network Settings

Prohibits modification of network
settings in the printer configuration
menu.

Record Copy and Print
per Account

Enables or disables the printer auditing
mode, which controls access to printer.

AR-PB2A

4 – 3