Read Sharp AR-P350 / AR-P450 (serv.man8) Service Manual online
AR-P350 TROUBLE CODES-8
3.Halt of operation in trouble
A. Troubles where the machine can be operated depending on the conditions (Include Multi Function)
1 :Operation possible in the OC mode
2 :Operation possible in the manual mode
3 :Single mode only
4 :Operation possible except for the staple mode
4 :Operation possible except for the staple mode
5 :Operation possible except for the trouble tray
6 :Operation possible if the image can be limited
8 :Original/list print possible after reception
8 :Original/list print possible after reception
9 :Operation possible except for the trouble paper exit section
10 :Operation possible by use of memory only
11 :Operation possible if the used port (NIC, Centro) is normal
11 :Operation possible if the used port (NIC, Centro) is normal
B. Trouble mode process
C. Writing to the trouble memory
In this series, the simulation (diag) allows to select whether the same trouble is written to the trouble memory when it occurs. If the DIAG simulation is
set as above, when any trouble occurs, its hysteresis is written to the trouble memory. DIAG(SIM 26-35)
0:
The same trouble as the previous one is not recorded. (Default)
1:
When a trouble occurs, it is written to the trouble memory without exception.
Trouble
Judgment
block
Trouble
code
Operation-possible mode
Copy read
(interruption, etc.)
FAX send
Email send
FAX print
Print
List print
(SPF trouble)
SCANNER
U5
1
1
1
O
O
O
Scanner section troubles
(Mirror motor, lens, copy lamp)
(Mirror motor, lens, copy lamp)
SCANNER
L1,L3,U2
(80,81)
(80,81)
X
X
X
O
O
O
(AE trouble)
-
L9
2
2
2
O
O
O
(ADU trouble)
PCU
U4
3
O
O
3
3
3
FAX board trouble
Controller/
FAX
FAX
F6,F7
O
X
O
X
O
O
FAX power OFF
Controller
O
X
O
X
O
O
Staple trouble
PCU
F1(10)
4
O
O
4
4
4
Paper feed tray trouble
PCU
F3, U6
(Desk)
(Desk)
5
O
O
5
5
5
(Process control trouble)
PCU
6
O
O
6
6
6
PCU section troubles
(Motor, fusing, etc.)
(Motor, fusing, etc.)
PCU
X
O
O
X
X
X
After-work trouble
PCU
9
O
O
9
9
9
Laser trouble
PCU
E7
(02 only),
L6
(02 only),
L6
X
O
O
X
X
X
HDD trouble
Controller
E7 (03)
X
X
X
X
X
X
CCD troubles (Shading, etc.)
SCANNER
E7
(10, 11, 13)
(10, 11, 13)
X
X
X
O
O
O
Scanner communication trouble
Controller
E7 (80)
X
X
X
O
O
O
PCU communication trouble
Controller
E7 (90)
X
O
O
X
X
X
Printer port trouble
Controller
F9
O
O
11
O
11
O
Backup battery voltage fall
Controller
U1 (01)
O
X
X
O
O
O
Memory trouble
(Expansion RAM not installed, etc.)
(Expansion RAM not installed, etc.)
Controller
U2
(00, 11, 12)
(00, 11, 12)
X
X
X
X
X
X
External communication invalid (RIC) Controller
U7, PF
X
X
X
X
X
X
Image memory trouble, decode error Controller
E7(01, 06)
X
X
X
X
X
X
O :
Operation possible
X :
Operation impossible
: Operation possible depending on conditions
Machine operation possible
depending on conditions
depending on conditions
Operations except for the trouble mode are possible (READY).
For the mode where operations are impossible, only setup can be allowed, and the message is provided to show
that operations are impossible. (NOT READY in this case.)
(Display)
A dialog is shown in case of a trouble. For the mode where operations are possible, the OK button is added to the
message. For the mode where operations are impossible, the OK button is not shown, and the process to cancel is
indicated.
For the mode where operations are impossible, only setup can be allowed, and the message is provided to show
that operations are impossible. (NOT READY in this case.)
(Display)
A dialog is shown in case of a trouble. For the mode where operations are possible, the OK button is added to the
message. For the mode where operations are impossible, the OK button is not shown, and the process to cancel is
indicated.
Machine operation is impossible The trouble display is always shown, and all setup operations are invalid.
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man8) service manuals if exist.