Read Sharp AR-P350 / AR-P450 (serv.man8) Service Manual online
AR-P350 DIAG-19
MNT CYCLE SETUP
Maintenance cycle setup.
Used to set the maintenance cycle.
(LCD display)
Used to set the maintenance cycle.
(LCD display)
*Pressing [OK] key displays the maintenance cycle.
*Using [
] and [
] keys changes the maintenance cycle.
*Pressing [OK] key set the change of the maintenance cycle.
*Pressing [BACK/C] key terminates the setting.
LIFE OVER SETTING
Life over setting.
Used to set whether to stop printing when the developer life is over.
(LCD display)
Used to set whether to stop printing when the developer life is over.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
] and [
] keys changes the YES or NO.
*Pressing [OK] key memorize the life over mode.
*Pressing [BACK/C] key terminates the setting.
*Pressing [BACK/C] key terminates the setting.
FINISHER JOGGER
ADJ.
ADJ.
Finisher jogger adjustment.
Used to adjust the finisher (AR-FN6/FN7) jogger.
For details, refer to each Service Manual of the AR-FN6/FN7.
(LCD display)
Used to adjust the finisher (AR-FN6/FN7) jogger.
For details, refer to each Service Manual of the AR-FN6/FN7.
(LCD display)
*Press [OK] key to display the finisher jogger adjustment value.
*Using [
] or [
] key changes the value.
*Press [MENU] key to display the adjustment value.
*Press [
*Press [
] or [
] key to change the value.
*Pressing [OK] key starts the finisher jogger adjustment.
*DATA ( LED) blinks during the processing.
*Pressing [BACK/C] key terminates the finisher jogger adjustment.
*Pressing [BACK/C] key terminates the finisher jogger adjustment.
CONSOLE FIN. SET X Console finisher setting.
Used to perform the adjustments of the console finisher (AR-FN7).
For details, refer to the Service Manual of the AR-FN7.
(LCD display)
For details, refer to the Service Manual of the AR-FN7.
(LCD display)
*Pressing the [
] or [
] key select the console finisher mode.
*Pressing [OK] key start the setting.
*Using [
*Using [
] and [
] keys changes the value.
*Pressing [OK] key memorize thevalue.
*Pressing [BACK/C] key terminates the setting.
Menu
Content
Initial
value
value
Set range
MNT CYCLE SETUP
Set
value
DEFAU
LT
40K
50K
80K
100K
120K
FREE
LIFE OVER SETTING
Set
value
YES
NO
FINISHER JOGGER ADJ.
CONSOLE FIN. SET X
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man8) service manuals if exist.