Read Sharp AR-P350 / AR-P450 (serv.man8) Service Manual online
AR-P350 DIAG-18
DESTINATION SETUP Destination setup.
Used to perform the destination setup.
(LCD display)
(LCD display)
*Pressing the [
] or [
] key select the destination.
*Pressing [OK] key displays the destination.
*Using [
*Using [
] and [
] keys changes the destination.
*Pressing [OK] key set the change of the destination.
*Pressing [BACK/C] key terminates the setting.
TRAY DETECT
TYPE xx
TYPE xx
Tray detect type setting.
Used to select between the AB series and the inch series for size detection of each paper feed tray.
(LCD display)
Used to select between the AB series and the inch series for size detection of each paper feed tray.
(LCD display)
*Pressing the [
] or [
] key select the tray.
*Pressing [OK] key displays the destination.
*Using [
*Using [
] and [
] keys changes the destination.
*Pressing [OK] key set the change of the destination.
*Pressing [BACK/C] key terminates the setting.
CE MARK SETTING
CE mark setting.
Used to set the operation mode conforming to the CE mark.
(LCD display)
Used to set the operation mode conforming to the CE mark.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
] and [
] keys changes the YES or NO.
*Pressing [OK] key memorize the CE mark mode.
*Pressing [BACK/C] key terminates the setting.
COUNTUP MODE
SETUP
SETUP
countup mode setup.
1.Used to set the count-up mode of A3 (11 x 17) paper.
2.Used to set whether to perform count-up of blank paper.
(LCD display)
1.Used to set the count-up mode of A3 (11 x 17) paper.
2.Used to set whether to perform count-up of blank paper.
(LCD display)
*Pressing the [
] or [
] key select the counter mode.
*Pressing [OK] key start the setting.
*Using [
] and [
] keys changes the countup number.
*Pressing [OK] key memorize the countup number.
*Pressing [BACK/C] key terminates the setting.
*Pressing [BACK/C] key terminates the setting.
A ~ C
D
Menu
Content
Initial
value
value
Set range
DESTINATION SETUP
TRAY DETECT TYPE XXX
XX:
M:
MFT
T2:
A3 Universal tray
T3:
Desk tray1
T4:
Desk tray2
Set
value
AB
INCH
CE MARK SETTING
Set
value
YES
NO
COUNTUP MODE SETUP X
X:
A:
total counter A3(11X17) countup mode.
B:
mainte counter A3(11X17) countup mode.
C:
deve counter A3(11X17) countup mode.
D:
blank paper countup mode.
Set
value
SINGLE
DOU-
BLE
Set
value
NO
(NO-
COUNT
UP)
YES
(COU-
NT UP)
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man8) service manuals if exist.