Read Sharp AR-P350 / AR-P450 (serv.man5) Handy Guide online
Firmware History
Version 2.0
Issue 01/02
36
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
Tiger (P)
FIRMWARE
FIRMWARE
Last Update
Apr-02
ARP350/450
MAIN PCU Revision/Correction
Made
Production
V4.10 V2.12 Previously, the machine did not recover from auto-shut off mode. This
failure is fixed in this version. The detection of Empty/Not empty/Full is
added to the saddle stitch tray status when using S-MON/PAU.
added to the saddle stitch tray status when using S-MON/PAU.
June 01
V5.09 V3.01 AR-FN7 “High speed stacking mode” is added to Key Operator Program.
Previously, a paper jam between the ADU and the main unit could not be
cleared without opening/closing the left cover twice. This failure is fixed
in this version.
cleared without opening/closing the left cover twice. This failure is fixed
in this version.
Jul-01
V6.06 V3.04 A change is made for compatibility with AR-PF1.
Aug-01
V6.06 V3.06 The message “Copying” was indicated and the machine hung up. This
failure is corrected. The default value of Sim.46-26 (Pattern Matching
Function when the fax data is sent.) the value is changed to ‘0’ (the
pattern matching function is available).
Function when the fax data is sent.) the value is changed to ‘0’ (the
pattern matching function is available).
Sep-01
V8.02 V5.00 The rotate-sorting function setting is available in Key OP (Checkbox
On/Off). The font list printing function is added on AR-PF1. The support
for binary mode is added.
for binary mode is added.
Oct-01
V9.07 V6.04 It is possible to change the maintenance cycle setting in “MNT CYCLE
SET UP” in the dialogue. However, Please be sure to select “No” for the
“LIFE OVER SETTING” in the dialogue.
“LIFE OVER SETTING” in the dialogue.
Dec-01
Ve.08 V7.02 1) Added [LINE THICKNESS] to the Default settings of the printer
condition settings
2) Added [EXTRA PRINT MODE] to the Default settings of the printer
condition settings
3) Added [DISABLING OF BYPASS PRINTING] to key operator
programs
4) Beep setting
5) Changed the process when exceeding staple capacity for saddle
stitching
6) If the amount of paper exceeds the capacity before printing in saddle
stitch B mode, the job stops.
7) ”7: 100K” was added for a value of Sim21-1 Maintenance Cycle
setting.
2) Added [EXTRA PRINT MODE] to the Default settings of the printer
condition settings
3) Added [DISABLING OF BYPASS PRINTING] to key operator
programs
4) Beep setting
5) Changed the process when exceeding staple capacity for saddle
stitching
6) If the amount of paper exceeds the capacity before printing in saddle
stitch B mode, the job stops.
7) ”7: 100K” was added for a value of Sim21-1 Maintenance Cycle
setting.
Jun-02
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man5) service manuals if exist.