AR-P350, AR-P450 (serv.man5). ARM350 450 ARP350 450 Handy Guide (NEW) - Sharp Copying Equipment Handy Guide. Page 35

 

 

 

35 

 

 

 

1) Added [LINE THICKNESS] to the Default settings of 
the printer condition settings 
(2) Added [EXTRA PRINT MODE] to the Default 
settings of the printer condition settings 
(3) Added [DISABLING OF BYPASS PRINTING] to key 
operator programs 
(4) Beep setting 
(5) Modified the Initial resolution setting screen of the 
Operation settings for fax/image transmission (for the 
network scanner setting) 
(6) Modified the default file format setting for fax/image 
transmission (for the network scanner setting) 
(7) 180-Degree image rotation with custom-size paper 
(8) Changed the OUTPUTTRAY  SETTINGS of INITIAL 
STATUS SETTINGS for copy mode. 
(9) Changed the process when exceeding staple 
capacity for saddle stitching 
(10) The image location in the self-printing 70 for the 
simulation and the dialog mode was improved. (Except 
AR-P350/P450) 
(11) If the amount of paper exceeds the capacity before 
printing in saddle stitch B mode, the job stops. 
12) If the job was stopped/resumed after several copies 
in simplex/staple mode, the machine stopped because 
the machine understood the stapler was full. This was 
corrected. 
(13) ”7: 100K” was added for a value of Sim21-1 
Maintenance Cycle setting. 
(14) Control level on outside counter when double-
counted in duplex printing mode was improved. (Except 
AR-P350/P450) 

MFPA.08.SFU 

Main Boot PCU 

Scan 

VmA.08 Vm4.00 V7.02  V5.06 

This firmware version will upgrade Main, Boot, Scan & PCU at 
the same time. It includes the above versions of firmware and 
is downloaded in the same way using Fcopy. 

June01