AR-P350, AR-P450 (serv.man5). ARM350 450 ARP350 450 Handy Guide (NEW) - Sharp Copying Equipment Handy Guide. Page 33

 

 

 

33 

 

 

 

There are two methods of upgrading the ARNC5J Network card: 

• 

SCVerup Utility 

• 

From DOS using FTP

SCVerup Utility is available from the Sharp Electronics Technical Web site. After starting the SCVerup utility from 
the list of devices, highlight the machine or machines you wish to upgrade. 

 

Click on the “Browse” button and select the firmware file, 

 

Click on the upload button, wait for the firmware upload to complete. 

For Windows NT both TCP/IP & IPX protocols need to be running to support SCVERUP.  If only TCP/IP protocol is 
running, use ftp. 

 

1.  

Go to MS-DOS prompt 

2.  

Change directory to that where binary file resides 

3.  

Enter ftp command   

 

“ftp” 

4. 

From ftp prompt enter   

“open IP address” 

5. 

For username key 

 

 

admin 

6. 

For password key 

 

 

Sharp 

7. 

At prompt key   

 

“bin” 

8. 

Then send binary file 

 

“put filename.bin” 

9. 

When completed type    

“bye” 

10. 

Power cycle the copier