AR-P350, AR-P450 (serv.man5). ARM350 450 ARP350 450 Handy Guide (NEW) - Sharp Copying Equipment Handy Guide. Page 34

 

 

 

34 

 

 

 

V4.10 V1.08  V2.12 V2.00 Previously, the machine became inoperative when printing a 

mixed document of envelope, postcard and regular sized paper as 
the machine requested for postcard/envelope when printing 
regular sized paper.  This failure is fixed in this version. Previously, 
the machine did not recover from auto-shut off mode.  This failure 
is fixed in this version. The message to say not to turn off the 
power at the time of paper jamming is added. Previously, the pop-
up message “out-of paper” appeared from S-MON when 
recovering from shut-off mode.  This failure is fixed in this version.  

V5.09 V2.01  V3.01 V3.02 AR-FN7 “High speed stacking mode” is added to Key Operator 

Program previously, the machine locked up if starting to use the 
machine right after clearing a DF-jam.  This failure is fixed in this 
version. Previously, a paper jam between the ADU and the main 
unit could not be cleared without opening/closing the left cover 
twice.  This failure is fixed in this version. Access from the web 
page on the Image Send Screen is made possible by a fix. A 
change is made to delete an email destination after sending e-mail 
if the e-mail destination is highlighted but the “Enable Hyperlink to 
FTP server to be e-mailed” check box is unchecked. 

V6.06 V2.01A V3.04 V4.00 A change is made for compatibility with AR-PF1. Sim.46-26 is 

added. (0 = Pattern matching function ON 1= Pattern matching 
function OFF). 

V6.06 V2.01A V3.06 V4.00 The message “Copying” was indicated and the machine hung up. 

This failure is corrected. The default value of Sim.46-26 (Pattern 
Matching Function when the fax data is sent.) the value is changed 
to ‘0’ (the pattern matching function is available). 

V8.12 V2.01B V5.00 V5.00 Image Send function is improved and the following function is 

added in order to improve the operation. The file transmission 
function in TIFF format is added. (It is possible for the user to 
select this function when the checkbox is ticked.) If the checkbox 
is off when the receiver on FTP is selected, the receiver selected 
when submitted can be cleared. The detailed information about 
the error code is mentioned in Help on Web page. The resolution 
(dpi) is indicated in Help on Web page. The file format can be 
selected every time the image is sent. The rotate-sorting function 
setting is available in Key OP (Checkbox On/Off). The font list 
printing function is added on AR-PF1. The support for binary mode 
is added. When the NC5J is installed, CE-00 trouble is 
experienced.  This failure is eliminated. (It is possible to reduce the 
CE-00 trouble if SW80-8 of Sim.66-1 is set as “1”.) The number of 
pages with memory full in Mass Original mode (special function) 
did not match to the number of pages with memory full in. 

V9.07 V3.02  V6.04 V5.02 The maintenance cycle setting was changed as follows: DEFAULT 

(50K) / 5K / 10K / 25K / 50K / 80K / FREE. Sim26-38 is added for 
MFP model. The machine does not stop if the number of copies 
reaches to the setting for the maintenance cycle + 10%.1 (PRINT 
STOP): The machine stops if the number of copies reaches to the 
setting for the maintenance cycle +10%.