Read Sharp AR-P16 (serv.man8) User Guide / Operation Manual online
7
Using Easy Calibration
Use Easy Calibration when there is only a small difference between the colours in the colour chart and the
test page printed as explained on page 3.
Follow the steps below to perform Easy Calibration using the operation panel.
test page printed as explained on page 3.
Follow the steps below to perform Easy Calibration using the operation panel.
1
Enter the key operator programs.
To enter the key operator programs, see “Using
the key operator programs” on page 3 of the Key
Operator’s Guide.
To enter the key operator programs, see “Using
the key operator programs” on page 3 of the Key
Operator’s Guide.
2
Touch the [PRINTER SETTINGS] key.
3
Touch the [COLOUR ADJUSTMENTS] key.
4
Touch the [EASY CALIBRATION] key.
5
Load A4 or letter-size paper in the tray and
touch the [EXECUTE] key.
touch the [EXECUTE] key.
When the [EXECUTE] key is touched, "SELF
PRINT IN PROGRESS" appears in the display.
After a brief interval, the test patterns for Easy
Calibration will be printed. (see the following
page).
PRINT IN PROGRESS" appears in the display.
After a brief interval, the test patterns for Easy
Calibration will be printed. (see the following
page).
6
Select the grey colour that you prefer from
either of the printed test patterns (test pattern
2 or test pattern 3), and set the X and Y coor-
dinates of that colour in the following screen.
For a detailed explanation of this procedure, see
“Easy Calibration” on the following page.
either of the printed test patterns (test pattern
2 or test pattern 3), and set the X and Y coor-
dinates of that colour in the following screen.
For a detailed explanation of this procedure, see
“Easy Calibration” on the following page.
How to use the keys in the screen
:
7
Touch the [OK] key.
Your settings will be saved and you will return to
the Colour Setting screen. Print a test page as
explained on page 3 and verify that the colours
match the colours in the standard colour chart.
Your settings will be saved and you will return to
the Colour Setting screen. Print a test page as
explained on page 3 and verify that the colours
match the colours in the standard colour chart.
KEY OPERATOR
CODE CHANGE
PRINTER
SETTINGS
ACCOUNT
CONTROL
Y SETTINGS
ST PRINT
PRODUCT K
N/W SCANN
SETTINGS
OPERATIO
SETTINGS
ENERGY SAVE
INTERFACE SETTINGS
COLOUR ADJUSTMENTS
O K
KEY OPERATOR PROGRAMS
COLOUR ADJUSTMENTS
COLOUR ADJUSTMENTS
EASY CALIBRATION
TEST PRINT
EXECUTE
MEMO
If you cannot find an acceptable colour of
grey in the test patterns, adjust the colour
balance using the Colour Balance settings
as explained on page 5.
grey in the test patterns, adjust the colour
balance using the Colour Balance settings
as explained on page 5.
KEY OPERATOR PROGRAMS
TEST PRINT
OK
PLEASE PLACE THE PRINTED TEST PATCH SELECT.
:Touch the
,
,
and
keys to select the
desired colour of grey.
Click on the first or last page to see other AR-P16 (serv.man8) service manuals if exist.