Read Sharp AR-P16 (serv.man8) User Guide / Operation Manual online
3
Printing a Test Page and Checking the Colours
Printing a Test Page
Follow these steps to print a test page from the operation panel.
1
Enter the key operator programs.
To enter the key operator programs, see “Using
the key operator programs” on page 3 of the Key
Operator’s Guide.
To enter the key operator programs, see “Using
the key operator programs” on page 3 of the Key
Operator’s Guide.
2
Touch the [PRINTER SETTINGS] key.
3
Touch the [COLOUR ADJUSTMENTS] key.
4
Touch the [TEST PRINT] key.
5
Load A4 or letter-size paper in the tray and
touch the [EXECUTE] key.
touch the [EXECUTE] key.
When the [EXECUTE] key is touched, "SELF
PRINT IN PROGRESS" appears in the display.
After a brief interval, a colour test page will be
printed (see below).
PRINT IN PROGRESS" appears in the display.
After a brief interval, a colour test page will be
printed (see below).
Test Page (printed by printer)
The top line of the test page shows the four colours (cyan, magenta, yellow, and black) at low density, mid den-
sity, and high density. The bottom line shows processed grey* at low density, mid density, and high density.
sity, and high density. The bottom line shows processed grey* at low density, mid density, and high density.
*Processed grey is the colour obtained when the cyan, magenta, and yellow colours on the top line are com-
bined together.
bined together.
KEY OPERATOR
CODE CHANGE
PRINTER
SETTINGS
ACCOUNT
CONTROL
Y SETTINGS
ST PRINT
PRODUCT K
N/W SCANN
SETTINGS
OPERATIO
SETTING
ENERGY SAVE
RE
INTERFACE SETTINGS
COLOUR ADJUSTMENTS
O K
COLOUR DJUSTMENTS
EASY CALIBRATION
TEST PRINT
EXECUTE
Low Density
Mid Density
High Density
C M Y Bk C M Y Bk C M Y Bk
Low Density
Mid Density
High Density
Click on the first or last page to see other AR-P16 (serv.man8) service manuals if exist.