Read Sharp AR-P16 (serv.man8) User Guide / Operation Manual online
4
Checking the Colours
The standard colour chart included with the printer is used to check the colours on the printed test page.
Follow the steps below to check the colours.
Follow the steps below to check the colours.
Low Density
Mid Density
High Density
C M Y Bk C M Y Bk C M Y Bk
Low Density
Mid Density
High Density
Low Density
Mid Density
High Density
Place the colour chart on
the printed test page as
shown. Check the density
of the colours on the test
page and see if they are
adjusted to the same level
as the colours on the
standard colour
the printed test page as
shown. Check the density
of the colours on the test
page and see if they are
adjusted to the same level
as the colours on the
standard colour
chart.
If the result of the comparison is that:
• There is a large deviation in the colour densities use the Colour Balance settings
(see the following page).
• There is a small deviation in the colour densities, use Easy Calibration (see 7 page).
Test page (printed by the printer)
Standard colour chart (included with the printer)
Click on the first or last page to see other AR-P16 (serv.man8) service manuals if exist.