Read Sharp AR-P11 (serv.man3) Service Manual online
AR-P11 SETTING AND ADJUSTMENTS / SIMULATION - 3
(2) Interface Menu
(3) PS3 Menu
Displayed only if the PS3 expansion kit (AR-PK1) (optional for some
models) is installed.
models) is installed.
(4) Test Print Menu
2. AR-PK1 (PS expansion kit) setup
A. Setup content
• The soft key is supplied by registering the manufacturing number
and the model name of the machine and the application number
attached to the PS expansion kit via the Web site.
Enter the soft key to the machine, and the PS3 function can be oper-
ated.
If, however, the setup enable conditions are not satisfied, inputs are
disabled.
attached to the PS expansion kit via the Web site.
Enter the soft key to the machine, and the PS3 function can be oper-
ated.
If, however, the setup enable conditions are not satisfied, inputs are
disabled.
• When the soft key is erroneously inputted:
When the function lock is canceled: the function lock turns to work.
When the function lock is working: the function lock is kept working.
When the function lock is working: the function lock is kept working.
B. Setup enable conditions
• The printer expansion kit (including the standard equipment) should
be installed.
• The Japanese font ROM should be installed to the printer board.
(Japan only)
• The printer function should be provided as standard provision.
C. Setup menu
Enter the soft key to the machine with SIM 26-11.
D. Function cancel menu
• When the diag menu or the key operator program menu is displayed,
the current machine state (the key is canceled or not) is displayed.
• Display content
ON: The function lock is working.
OFF: The function lock is canceled.
OFF: The function lock is canceled.
• Regardless of the display position
3. Email alert status
A. Setup contents
• The soft key is supplied by registering the manufacturing number
and the model name of the machine and the fixed application num-
ber via the Web site.
Enter the soft key to the machine, and the email alert and status
function can be operated.
If, however, the setup enable conditions are not satisfied, inputs are
disabled.
ber via the Web site.
Enter the soft key to the machine, and the email alert and status
function can be operated.
If, however, the setup enable conditions are not satisfied, inputs are
disabled.
• When the soft key is erroneously inputted:
When the function lock is canceled: the function lock turns to work.
When the function lock is working: the function lock is kept working.
When the function lock is working: the function lock is kept working.
B. Setup enable conditions
• The printer expansion kit (including the standard equipment) should
be installed.
• The network expansion kit (NIC) should be installed.
C. Setup menu
Enter the soft key to the machine with SIM 26-12.
D. Function cancel display
• When the diag menu or the key operator program menu is displayed,
the current machine state (the key is canceled or not) is displayed.
• Display content
ON: The function lock is working.
OFF: The function lock is canceled.
OFF: The function lock is canceled.
• Regardless of the display position
[5] SIMULATION
1. Simulation mode key operation
2. Simulation contents
Item
Setting choice
Description
I/ O TIME OUT
1 SEC. - 60 SEC -
999
999
Sets I/ O time out. If no data
is received within the preset
time, print processing will
be canceled.
is received within the preset
time, print processing will
be canceled.
PORT
SWITCHING
METHOD
SWITCHING
METHOD
SWITCH AT END
OF JOB / SWITCH
AFTER I/ O
TIMEOUT
OF JOB / SWITCH
AFTER I/ O
TIMEOUT
Determines which switching
method to use for the
interface port.
method to use for the
interface port.
Item
Setting choice
Description
PRINT PS3
ERROR
ERROR
On / Off
Prints a PostScript error
page when there are
problems with a print job if
this function is set.
page when there are
problems with a print job if
this function is set.
Item
Description
CONFIGURATION PAGE
Prints the configuration page.
NETWORK STATUS PAGE
Prints the outline of network settings.
This item is displayed only if the Print
Server Card (AR- NC5J) (optional for
some models) is installed.
This item is displayed only if the Print
Server Card (AR- NC5J) (optional for
some models) is installed.
PCL FONT LIST
Prints the PCL6 font list.
PS3 FONT LIST
Prints the PS3 font list. Displayed only
if the PS3 expansion kit (AR-PK1)
(optional for some models) is
installed.
if the PS3 expansion kit (AR-PK1)
(optional for some models) is
installed.
OPTION FONT LIST
Prints the barcode font list. This item
is displayed only if the optional
barcode font Kit (AR- PF1) is
installed.
is displayed only if the optional
barcode font Kit (AR- PF1) is
installed.
Procedure
Key operation
1
Simulation
mode selection
mode selection
Normal
mode
mode
2 Main code selection
3 Sub code selection
4
Selection of the mode and
item
item
5 Start simulation operation
6
Returns to the sub code
selection
selection
Simulation mode clear
Main
code
code
Sub
code
Detail
Details of operation
22
1
Various counters
display
display
The current printer (various)
counter value is displayed.
counter value is displayed.
24
9
Printer/other
counter clear
counter clear
Printer (other) counter clear.
67
14
Printer Flash ROM
data download
data download
Enters the Flash ROM
version-up mode of the printer
PWB. (For details, refer to the
Flash ROM version up
procedures described later.)
version-up mode of the printer
PWB. (For details, refer to the
Flash ROM version up
procedures described later.)
#
→
C
INTERRUPT
→
→
INTERRUPT
10-key (Input main code)
→
START
10-key (Input sub code)
→
START
10-key and
↑ ↓
START
OK or
INTERRUPT
CA
Click on the first or last page to see other AR-P11 (serv.man3) service manuals if exist.