Read Sharp AR-P11 (serv.man3) Service Manual online
AR-P11 INSTALLATION - 3
(1) Installation with Plug & Play
1) Ensure that the printer cable is connected between your computer
and the printer and then turn on the printer.
Note :
Before installing the printer driver, be sure to close all other open
applications.
applications.
2) Follow the on-screen instructions.
To specify the printer driver path, see the table below.
To enter the printer name, use the following name.
"SHARP" + printer model name + printer driver
Example: SHARP AR-235 PCL6
(2) Installation with Add Printer wizard
If you use the Add Printer wizard to install a printer driver, follow the
standard procedure of your operating system.
standard procedure of your operating system.
An example of installation is described below for Windows 98.
1) On the Start menu, highlight "Settings", then highlight and click on
"Printers".
2) Insert a PRINTER UTILITIES CD-ROM into a CD-ROM drive.
If your computer is configured for auto start, the license agreement
will be displayed. Click the "Cancel" button.
will be displayed. Click the "Cancel" button.
3) From the Printers window, select "Add Printer" to run the Add
Printer Wizard. Then click "Next".
4) If Windows 98 has been configured for network operation, it might
be necessary to select "Local printer" or "Network printer". Select
the appropriate option, and click "Next" to continue.
the appropriate option, and click "Next" to continue.
5) If "Network printer" was selected, specify the appropriate Network
Path or Queue Name and click "Next".
6) The installation window will display a list of printer models and
manufacturers. Click the "Have Disk" button.
7) Follow the on-screen instructions.
To specify the printer driver path, see the table below.
To enter the printer name, use the following name.
"SHARP" + printer model name + printer driver
Example: SHARP AR-235 PCL6
(3) Printer driver path
* The CD-ROM drive is assigned as drive R here.
C. Installing the resident font information for PPD
(Windows 95/98/Me)
If you have installed the PPD printer driver for Windows 95/ Windows
98/ Windows Me, install the resident font information following the pro-
cedure below.
98/ Windows Me, install the resident font information following the pro-
cedure below.
Note:
• Before installing the resident font information, be sure to install the
printer driver.
• When installing the resident font information, be sure to close all
other open applications.
• If you have changed the port for the printer from Properties of the
printer driver when the printer is used as a network printer, reinstall
the resident font information.
the resident font information.
• If printer resident fonts cannot be specified from application soft-
ware, the resident font information has not been installed or the
information is not proper. In this case, reinstall the resident font infor-
mation.
information is not proper. In this case, reinstall the resident font infor-
mation.
• With the PPD driver for Windows NT 4.0, the printer resident fonts
cannot be specified. Font downloading, therefore, is always per-
formed when printing is executed. To use the printer resident fonts
under Windows NT 4.0, install the PS, PCL5e or PCL6 driver. For
Windows 2000, the resident font information is automatically
installed with the printer driver.
formed when printing is executed. To use the printer resident fonts
under Windows NT 4.0, install the PS, PCL5e or PCL6 driver. For
Windows 2000, the resident font information is automatically
installed with the printer driver.
(1) Installation procedure
1) Start Windows.
2) Insert the supplied PRINTER UTILITIES CD-ROM into a CD-ROM
drive.
If your computer is configured for auto start, the license agreement
will be displayed. Click the "Cancel" button.
will be displayed. Click the "Cancel" button.
3) On the "Start" menu, click "Run".
4) Enter the CD-ROM drive and "packages\english\psppd9x\Pfm-
setup. exe". Then click the "OK" button.
Example: If the CD-ROM drive is designated as drive R, type
"R:\packages\english\psppd9x\Pfmsetup. exe" and click "OK".
"R:\packages\english\psppd9x\Pfmsetup. exe" and click "OK".
5) Click the "OK" button.
If the printer driver has not been installed, installation of the resi-
dent font information will not be performed.
dent font information will not be performed.
6) Click the "OK" button.
7) After the resident font information has been installed, restart Win-
dows.
D. Uninstalling unnecessary software
To uninstall a printer driver or a printer utility that has been
installed using the installer, follow the procedure shown below.
installed using the installer, follow the procedure shown below.
1) On the "Start" menu, highlight "Settings", then highlight and click
on "Control Panel".
2) Double-click "Add/ Remove Programs".
3) Select the driver or utility to be deleted and click "Add/ Remove".
4) Click "Yes".
To delete a printer driver that has been installed using the Plug
and Play feature or from the Add Printer wizard, follow the proce-
dure shown below.
and Play feature or from the Add Printer wizard, follow the proce-
dure shown below.
1) On the "Start" menu, highlight "Settings", then highlight and click
on "Printers".
2) Right-click the printer driver to be deleted.
3) Click "Delete" and then follow the instructions on your screen.
Printer
driver
Operating System
Path
PCL5e
Windows 95/98/Me
R:\Option\English\9x_me_pcl5e
Windows NT 4.0
R:\Option\English\nt_pcl5e
Windows 2000
R:\Option\English\2k_pcl5e
PCL6
Windows 95/98/Me
R:\Option\English\9x_me_pcl6
Windows NT 4.0
R:\Option\English\nt_pcl6
Windows 2000
R:\Option\English\2k_pcl6
PostScript
Windows 95/98/Me
R:\Option\English\9x_me_ps
Windows NT 4.0
R:\Option\English\nt_ps
Windows 2000
R:\Option\English\2k_ps
PPD
Windows 95/98/Me
R:\Option\English\9x_me_psppd
Windows NT 4.0
R:\Option\English\nt_psppd
Windows 2000
R:\Option\English\2k_psppd
Click on the first or last page to see other AR-P11 (serv.man3) service manuals if exist.